Control, Maintenance And Service Of The Machine's Safety Equipment; Stop Switch - Husqvarna 322E, 325E-X Operator's Manual

Husqvarna edger operator's manual
Hide thumbs Also See for 322E, 325E-X:
Table of Contents

Advertisement

Control, maintenance and service of
the machine's safety equipment
IMPORTANT INFORMATION
• All service and repairs to the machine require special
training.
• This applies especially to the machine's safety
equipment. If the machine does not meet any of the
controls listed below you should contact your
service workshop.
• The purchase of one of our products guarantees that
professional repair and servicing will be carried out
on it. If the point of purchase is not one of our
servicing dealers, please ask for details of the
closest service workshop.
1. Throttle trigger lock
• Check that the throttle is
locked in the "idling position"
when the throttle trigger lock
is in its original position.
• Press in the throttle trigger
lock and make sure it returns
to its original position when
released.
• Ensure that the throttle and
throttle trigger lock move
easily and that their return
spring systems function.
• See section "Start" . Start the
machine and apply full
throttle. Release the throttle
and check that the cutting
equipment stops and remains
at a standstill. If the cutting
equipment rotates with the
throttle in the idling position
then the carburettor's idling
setting must be checked. See
chapter "Maintenance" .

2. Stop switch

• Start the engine and make
sure that the engine stops
when the stop switch is
moved to the stop position.
6
– English
SAFETY INSTRUCTIONS
#
3. Cutting attachment
guard
• Ensure that the guard is
undamaged and is not
cracked.
• Replace the guard if it has
been exposed to impact or is
cracked.
• Always use the prescribed
blade and guard combination,
see chapter "Technical data" .
4. Vibration damping
system
• Check the vibration damping
element regularly for material
cracks and distortion.
• Check that the vibration
damping element is
undamaged and securely
attached.
5. Muffler
1.
Never use a machine that
has a defective muffler.
2. Check regularly that the
muffler is secure.
3. If your muffler is fitted with
a spark arrest screen then
it should be cleaned
regularly. A blocked
screen leads to the engine
overheating with serious
damage as a result. Never
use a muffler with a
detective spark arrest
screen.

Advertisement

Table of Contents
loading

Table of Contents