Push To Talk - Nokia E63 User Manual

Make a call
A voice tag for a contact is the name or nickname that is
saved on the contact in Contacts.
Note: Using voice tags may be difficult in a noisy
environment or during an emergency, so you should not
rely solely upon voice dialing in all circumstances.
To listen to a voice tag, open a contact, and select
Options Play voice tag.
>
1. To make a call using a voice command, press and hold
the voice key.
2. When you hear the tone or see the visual display,
clearly speak the name saved on the contact.
3. The device plays a synthesised voice tag for the
recognised contact in the selected device language,
and displays the name and number. After a timeout of
1.5 seconds, the device dials the number. If the
recognised contact was not correct, select
a list of other matches or
If several numbers are saved under the contact, the
device selects the default number, if it has been set.
Otherwise, the device selects the first available number
of the following fields: Mobile,
Mobile (business), Telephone,
(business).
Launch an application
The device creates voice tags for the applications listed in
the Voice commands application.
Next to view
Quit to cancel dialling.
Mobile (home),
Tel. (home), and Tel.
To launch an application using a voice command, press
and hold the voice key, and clearly speak the name of the
application. If the recognised application was not correct,
select Next to view a list of other matches or
cancel.
To add more applications to the list, select
New application.
To change the voice command of an application, select
Options Change command, and enter the new
>
command.
Change profiles
The device creates a voice tag for each profile. To set on a
profile using a voice command, press and hold the voice
key, and say the name of the profile.
To change the voice command, select
Options Change command.
>
Voice command settings
To switch off the synthesiser that plays recognised voice
commands in the selected device language, select
Options Settings
> >
To reset voice recognition learning when the main user of
the device has changed, select

Push to talk

Select Menu Communic.
>
Quit
Options
Profiles
>
Synthesiser > Off.
Remove voice adapts..
> PTT.
to
>
37