Get Started; First Start-Up; Welcome; Settings Wizard - Nokia E63 User Manual

Get started

After you have set up your device, switch it on and start to
explore what is new in Eseries.

First start-up

1. Press and hold the power key
until you feel the device vibrate.
2. If prompted, enter the PIN code
or lock code, and select OK.
3. When prompted, enter the country in which you are
located and the current date and time. To find your
country, enter the first letters of the country name. It
is important to select the correct country, because
scheduled calendar entries may change if you change
the country later and the new country is located in a
different time zone.
4. The Welcome application opens. Select from the
options, or select Exit
To configure the settings in your device, use the wizards
available in the home screen and the Settings wizard
application. When you switch the device on, it may
recognise the SIM card provider and configure some
settings automatically. You can also contact your service
provider for the correct settings.
You can switch the device on without inserting a SIM card.
The device starts up in the offline profile, and you cannot
use the network-dependent phone functions.
to close the application.
To switch the device off, press and hold the power key.

Welcome

When you switch on your device for the first time, the
Welcome application opens. Select from the following:
Tutorial provides information about your device and
•
shows you how to use it.
Switch enables you to transfer content, such as
•
contacts and calendar entries, from a compatible Nokia
device. See "Transfer content between
devices", p. 17.
E-mail settings helps you configure e-mail settings.
•
Sett. wizard helps you configure various settings.
•
"Settings wizard", p. 15.
To open the Welcome application later, select
Help > Welcome.
The available options may vary.

Settings wizard

Select Menu Tools
> >
Settings wizard configures your device for settings based
on your network operator information. To use these
services, you may have to contact your service provider to
activate a data connection or other services.
Menu
Sett. wizard.
See
>
15