Panasonic PVQ-1312B Operating Instructions Manual page 23

<Model PVQ-2012 unit shown>
POWER VOL CH STOP/EJECT REW/
VIDEO IN AUDIO IN
ACTION
REW
PLAY/REPEAT FF/ REC TIMER/FM
REC ON TIMER PROG TIMER
FF
Auto Operation Functions
Auto Shut Off
No broadcast signal in TV, blank tape is
Played for 5 minutes
=> Power turns off
• This feature is canceled if any button is
pressed during above mode.
Auto Playback
Insert a tape in Power off mode
=> Power turns on
• Playback begins if tape has no record tab.
Auto Rewind
Tape reaches its end
=> Rewind => Stop
Playback Auto Eject
Tape with no record tab reaches its end
Rewind => Stop => Eject
Tape Position Display
To find out present tape position and amount of tape
remaining.
Tape position cannot be detected for
C-Cassettes, tapes under 30 minutes, and some
other tapes.
1
Press TAPE POSITION to detect
current tape position.
• "DETECTING TAPE POSITION"
DETECT I NG TAPE POS I T I ON
• The present tape position
• Tape remaining time display may
2
Press TAPE POSITION (or wait 5
seconds) to return to normal screen.
Note
• This function cannot display exact amount of
tape remaining for tapes 30 minutes or less, or
for tapes over 120 minutes in length.
(Repeat Play is "OFF")
is displayed only when a
cassette is first inserted and it
takes several seconds for
correct tape position to appear.
indication and amount of tape
remaining (according to tape
speed) is displayed.
not be precise.
23