Setting The Headphone Sound; Useful Functions; Recording In Dim Places (Video Light) - Sony NXCAM HXR-NX3 Operating Manual

To restore automatic adjustment
Set the AUTO/MAN switch (G) of the
manually adjusted channel to AUTO.

Setting the headphone sound

When you select CH1 or CH2, the
respective channel's (input) sound is output
to the headphones.
When you select MIX, both CH1 and CH2
input sounds are output to the headphones.
You can select [MONO] or [STEREO] on
[HEADPHONE OUT] for the audio output
when MIX is selected. (p. 91).

Useful functions

Recording in dim places (Video
light)
Slide the LIGHT switch to ON.
Video light
b Notes
• The video light does not turn on when the AC
adaptor AC-L100C (supplied) is used. To use
the video light, use a battery pack (sold
separately).
• If you use the video light with an XLR
microphone attached, the microphone may cast
a shadow in the shooting frame depending on
the zoom position.
• The video light generates strong light. Do not
use the video light directly in front of the eyes at
close range.
• The battery drains quickly while using the video
light.
• When the video light is lit, automatic white
balance adjustment may not work properly
depending on the recording conditions. In this
case, use the one push white balance function
(p. 42).
• It may take several seconds for the video light to
turn off after you turn off the power of the
camcorder with a remote commander (sold
separately) connected to the REMOTE jack.
45
Continued ,