Display 11: Uplink DTX switching display
With this display it is possible to change MS to use DTX or not if BS
allows MS to decide this.
This display must be activated from MENU to change the DTX state.
When MENU is not active and the user is scrolling the field test
displays with NEXT and PREVIOUS, the DTX state will not change.
Where:
• aaaaaaaaaa Status of the switched mode. The values are:
The default state of DTX. The values are ON or OFF.
bbb
The DTX value from BS. The values are:
ccc
HELP display:
DTX ON : MS uses DTX
DTX OFF : MS does not use DTX
DTX DEF : MS uses default state of DTX.
Defined in MS_PAR.H
NOT ALLOWED: BS does not allow MS to decide
whether it uses DTX or not.
MAY: BS allows MS to decide whether it uses DTX
or not on uplink.
USE: BS controls MS to use DTX (on uplink)
NOT: BS controls MS not to use DTX (on uplink)
20