D-Link DFL-1660 User Manual page 480

Illegal Fragments setting, 457
Initial Silence (HA) setting, 432
insertion attack prevention, 277
Interface Alias (SNMP) setting, 65
Interface Description (SNMP) setting, 65
interfaces, 84
disabling, 85
groups, 98
loopback, 84, 85
physical, 84
internet key exchange (see IKE)
Interval between synchronization setting, 123
intrusion, detection and prevention (see IDP)
intrusion detection rule, 276
invalid checksum
in cluster heartbeats, 431
IP address objects, 76
IP Option Sizes setting, 443
IP Options Other setting, 443
IP Option Source/Return setting, 443
IP Options Timestamps setting, 443
IP pools, 198
with config mode, 362
IP Reserved Flag setting, 443
IP router alert option setting, 443
IP rules, 106
bi-directional connections, 110
IP rule set, 106
duplicate naming, 34
evaluation order, 108
folders, 110
IPsec, 343
advanced settings, 371
algorithm proposal lists, 352
and IP rules, 357
clients, 338
LAN to LAN setup, 334
overview, 343
quick start guide, 333
roaming clients setup, 336
troubleshooting, 386
tunnel establishment, 357
tunnels, 357
IPsec Before Rules setting, 372
usage, 357
IPsec Certificate Cache Max setting, 373
IPsec Gateway Name Cache Time setting, 373
IPsec Max Rules setting, 371
IPsec Max Tunnels setting, 372
ip validation
with config mode, 362
L
L2TP, 375
advanced settings, 380
client, 381
quick start guide, 339
server, 376
L2TP Before Rules setting, 380
L3 Cache Size setting, 185
LAN to LAN tunnels, 358
quick start guide, 334, 335
Large Buffers (reassembly) setting, 461
Layer Size Consistency setting, 442
LDAP
authentication, 314
authentication with PPP, 317
servers, 363
Lease Store Interval setting, 194
link state algorithm, 154
Local Console Timeout setting, 45
local IP address in routes, 131
Log Checksum Errors setting, 441
Log Connections setting, 451
Log Connection Usage setting, 452
logging, 51
advanced settings, 54
memlog, 52
SNMP traps, 53
syslog, 52
login authentication, 318
log messages, 51
Log non IP4 setting, 441
Log Open Fails setting, 451
Logout at shutdown (RADIUS) setting, 59, 60
logout from CLI, 37
Log Oversized Packets setting, 456
Log Received TTL 0 setting, 441
Log Reverse Opens setting, 451
Log State Violations setting, 451
loopback interfaces, 84, 85
Low Broadcast TTL Action setting, 444
M
MAC addresses, 99
management interfaces, 25
advanced settings, 45
configuring remote access, 37
managing NetDefendOS, 25
Max AH Length setting, 455
Max Auto Routes (DHCP) setting, 196
Max Concurrent (reassembly) setting, 461
Max Connections (reassembly) setting, 462
Max Connections setting, 452
Max ESP Length setting, 455
Max GRE Length setting, 455
Max Hops (DHCP) setting, 196
Max ICMP Length setting, 455
Max IPIP/FWZ Length setting, 456
Max IPsec IPComp Length setting, 456
Max L2TP Length setting, 456
Max lease Time (DHCP) setting, 196
Max Memory (reassembly) setting, 462
Max OSPF Length setting, 456
Max Other Length setting, 456
Max Pipe Users setting, 462
Max PPM (DHCP) setting, 196
Max PPP Resends setting, 380
Max Radius Contexts setting, 60
Max Reassembly Time Limit setting, 459
max sessions
services parameter, 81
Max Size (reassembly) setting, 461
Max SKIP Length setting, 456
480
Alphabetical Index