Table of Contents
Advertisement
4. MOUNTING THE TEMPLATE CASING
CASING/TEMPLATE MODEL
SINGLE-ZONE SIRIUS SAT KIT
DUAL-ZONE SIRIUS SAT KIT
Install SIRIUS SAT model inside the casing/template supplied in a separate pack.
Make sure the template casing model is correct (L= 600 or L=800 mm).
Fit the template/casing in a niche in the wall made for this purpose (dimensions indicated in gures 2 and 3) and secure it
with the relative lateral bent pins. Make sure the installation allows easy access for maintenance.
Remove the door and white frame and put back after installation (make sure the casing accessories also include the key
for opening the door).
The frame can be depth-adjusted by using the 4 butter y nuts located in the side guides. It is therefore possible to t the
frame ush against the plaster and remove it when painting the wall.
Assemble the system starting from the position of the water connectors on the lower crossbar of the template (recessed
into the casing by 30 cm).
Install the casing in the stairwell outside the apartment to heat.
L = 600
H = 650
P = 150
Figure 2: casing/template
INSTALLATION AND OPERATING MANUAL
L = 600 mm
L = 800 mm
SIRIUS SAT
DUAL-ZONE CASING
WIDTH
SIRIUS SAT
SINGLE-ZONE CASING
L = 800
H = 750
P = 150
9
SIRIUS SAT MODELS
RA
RA2Z
912.807.1 - GB
Advertisement
Table of Contents
