Monitoring The Host Adapter, Arrays And Devices - HighPoint RocketRAID 432x User Manual

RocketRAID BIOS Utility
4 – Monitoring the Host Adapter, Arrays and Devices
The BIOS Settings Utility allows the Administrator to check the status of the
RocketRAID host adapter, and any devices (hard disks), and arrays hosted by the
adapter.
Disk/Array Status
To check the status of any disk or array, use Tab to select the Disk or Array Windows,
highlight the target disk/array and press enter.
Array Information – this will display the array's Name, RAID type, Block size, Sector
size, member hard disks, and status.
Disk Information – this will display the disk Model Number, serial number, firmware
revision, capacity, and various disk related settings (NCQ, TCQ, Read Ahead, Write
Cache, and Staggered Drive spinup mode).
Alternately, highlight the target disk/array, then highlight either Disk or Array from
the tool bar, select Information, and press Enter.
25