Installing The Rocketraid 4520 Host Adapter - HighPoint RocketRAID 4520 Quick Installation Manual

Installing the RocketRAID 4520 Host Adapter

Note: Make sure the system is powered-off before installing the host
adapter.
1) Open the system chassis and locate an unused PCI-E (2.0 or 1.0) ×8
(or x16) slot.
2) Remove the PCI-E slot cover.
3) Gently insert the RocketRAID 4520 into the PCI-E slot, and secure
the bracket to the system chassis.
4) After installing the adapter, attach the hard disks or backplane
enclosure to the host adapter using the mini-SAS cables.
5) Close and secure the system chassis.
4