Connection; Lens; Connecting To Monitor; Connecting To Power - Samsung SOC-4020 SERIES Instruction Manual

Connection

LENS

The DC lens is supplied with this camera.
Notes
• If the lens is marked with fingerprints or other marks, the image quality might be poor.
• It is recommended to use the built-in iris lens to improve the image quality under low
illumination.

Connecting to Monitor

Connect the VIDEO out jack to the monitor video in jack.
CCD Camera
• As the connecting method varies with the instruments, refer to the manual
supplied with the instrument.
• Connect the cable after power is turned off.
• Set the 75Ω / Hi-Z selection switch as shown below if you have an intermediate device.
CCD Camera
Intermediate
COLOR CCD CAMERA 14
Monitor
End monitor
User's Manual

Connecting to Power

Each model has different power specification, please check the name of the model
and power specification before connecting to power source.
Please refer to the sticker identifying the model, which is attached on the product,
for power specification.
For DC Power Type
• The wire is polarized. Be careful of polarity.
• Use DC 12V power source for SOC-4020SERIES
Resistance of copper wire [at 20C˚ (68˚F)]
2
Copper wire size (AWG) #24(0.22mm ) #22(0.33mm
Resistance ( Ω / m) 0.078
Voltage Drop (V/m) 0.028
• As voltage may drop according to the length of electric cord as above table, a
camera may malfunction if too long output line of adaptor is connected to the
camera.
* Voltage for camera operation: DC 12V ± 10%
* Voltage drops on above table are variable according to types of electric cord and makers.
COLOR CCD CAMERA
2 2 2
) #20(0.52mm ) #18(0.83mm )
0.050 0.030 0.018
0.018 0.011 0.006
15 User's Manual