Back - Samsung SOC-4020 SERIES Instruction Manual

Name and Function of Each Part

Back

Video Out Jack
Connect to the video input connector of monitor. This jack outputs a
composite video signal. Use a coaxial cable for connection.
DC Level Adjustment V.R
Used to adjust video output level of DC driven auto iris lens. When the
brightness control of the monitor does not operate correctly, you can get the
optimum picture by controlling the DC level of camera.
Monitor Picture Adjustment direction
To make it brighter Turn clockwise
COLOR CCD CAMERA 10
* This diagram is based on SOC-4020Series
Monitor Picture Adjustment direction
To make it darker Turn counterclockwise
User's Manual
V. PHASE Adjustment V.R: AC type
If the camera is to be used in the LL mode, the vertical phase may require
adjustment to synchronize the vertical phase of the camera with other camera
in the system. Make this adjustment when the vertical phase of the camera
does not match with other cameras or systems. For correct adjustment, use a
multi - channel oscilloscope. The V. PHASE adjustment can be readjusted.
Notes
• This adjustment is necessary only when linelock is performed.
• There is no V. PHASE adjustment VR on the rear of DC power type.
Power Input Terminal
Used to connect AC/DC power source.
Power Lamp
The power lamp turns on when power is properly supplied.
Function Selection Switch
* Use the select switches on the rear of camera.
(1) BLC(Backlight Compensation) ON/OFF Switch
This switch improves an image that is darkened because of backlighting.
When the lighting source is in the rear of an object, the object might be seen
somewhat dark. If you want to see the object clearly, turn this switch ON.
The effective area where backlight compensation is activate is fixed in the
center of the screen.
COLOR CCD CAMERA 11 User's Manual