Climate Control; Auto Button - Subaru XV CROSSTREK HYBRID 2014 Quick Reference Manual

C L I M AT E C O N T RO L
C
A H
Type A
C D
A H
Type B
A

AUTO button

FULL AUTO mode operation:
When the AUTO button is pressed, the indicator light FULL AUTO on the display illuminates.
In this state, fan speed, air flow distribution, air-inlet control, and air conditioner compressor
operation are automatically controlled.
AUTO mode operation:
If you operate any of the buttons on the control panel other than the OFF button, rear window
defogger button and temperature control dial(s) during FULL AUTO mode operation, the
FULL indicator light on the control panel will turn off and AUTO indicator light will remain
illuminated. You can then manually control the system as desired using the button you
operated. To change the system back to the FULL AUTO mode, press the AUTO button.
B
Fan speed control dial
Turn dial to turn on and to select fan speeds.
D
Airflow mode selection dial / button
Turn dial or press the button to select the
desired air flow mode.
E
Air inlet selection button
Press button to select air flow.
ON (recirculation): Interior air is recirculated inside vehicle.
OFF (outside air): Outside air is drawn into the passenger compartment.
14
◆ Some functions are available on certain models. ◆ For detailed operating and safety information, please consult your Owner's Manual.
B
F E I
B J
F E I
D
G
Control panel
for Type A
C
G
Control panel
for Type B
C
Temperature control dial
Turn the dial to regulate the temperature
of airflow.
Turn the dial to set the preferred interior
temperature.