5
Press , then press or to select Hue,
Saturation or Brightness.
6
Press or to adjust the settings as required.
Hue
Saturation
Red
0
NOTE:
If you select 3D Colour Management Off mode, this
mode is not available.
Resetting the Base Colour Adjustment
The reset function adjusts the base colour
adjustment to the factory settings.
1
From the Base Colour Adjustment menu, press
or to select Reset.
2
Press OK.
3
A confi rmation message will appear. Press or
to select Yes, and then press OK.
Using the Active Backlight Control
(except for 32L2450 Series)
In order to improve screen visibility, the Active
Backlight Control sets the screen brightness
automatically during dark scenes.
1
From the PICTURE menu, press or to
select Active Backlight Control.
2
Press or to select On or Off .
Using the Picture Analyser
Displays the picture histogram.
1
From the PICTURE menu, press or to
select Picture Analyser.
Histogram: Shows the bright and dark areas of
the displayed picture, and the distribution of
colours in a graph.
Contrast Curve: Shows the correction curve,
which improves the expressive feel of the
displayed picture, in a graph.
To close the Picture Analyser screen, press
EXIT.
Using the TV's features
Stereo and Bilingual transmissions
(for DTV programmes)
For stereo or dual mono broadcasts, press s and
use or to select settings.
Brightness
0
0
For multi-audio track broadcasts, press s
repeatedly to change the audio language (- page
30).
Stereo and Bilingual transmissions
(for ATV programmes)
Setting the MTS (Multi-channel TV Sound)
Auto mode
The MTS Auto mode automatically recognize stereo/
bilingual programmes depending on the broadcast
signal.
1
2
Mono mode
If you experience noise or poor reception of any
stereo/bilingual programme, set the MTS mode to
Mono.
Noise will be reduced and reception may improve.
NOTE:
If you experience noise with a particular programme
on whose channel reception is usually good, try setting
MTS mode to Auto, then press s to switch to e
Mono (monaural).
Mode Display
d Stereo
Stereo S Left S Right
j Dual mono
Dual 1 S Dual 2 S Dual
e Mono
Surround
Press MENU, and then press or to display
the SOUND menu.
SOUND
MTS
Dual
Balance
0
Advanced Sound Settings
Audio Distortion Control
Dynamic Range Control
Audio Level Offset
Spectrum Analyser
Press or to select MTS, and then press
or to select Auto or Mono.
Pressing
–
–
Auto
Dual 1
On
Off
21