Administration > Log; Administration > Diagnostics - Linksys WRT160N User Manual

Chapter 3
If you want to use UPnP, keep the default setting,
UPnP
Enabled. Otherwise, select Disabled.
Allow Users to Configure
if you want to be able to make manual changes to the
Router while using the UPnP feature. Otherwise, select
Disabled.
Allow Users to Disable Internet Access
if you want to be able to prohibit any and all Internet
connections. Otherwise, keep the default setting,
Disabled.
Backup and Restore
Backup Configurations
configuration settings, click this button and follow the on-
screen instructions.
Restore Configurations
configuration settings, click this button and follow the on-
screen instructions. (You must have previously backed up
the Router's configuration settings.)
Click Save Settings to apply your changes, or click Cancel
Changes to cancel your changes.
Administration > Log
The Router can keep logs of all traffic for your Internet
connection.
Administration > Log
Log
To disable the Log function, select Disabled. To
Log
monitor traffic between the network and the Internet,
keep the default, Enabled. With logging enabled, you can
choose to view temporary logs.
To view the logs, click View Log.
View Log
Wireless-N Broadband Router
Keep the default, Enabled,
Select Enabled,
To back up the Router's
To restore the Router's
Advanced Configuration
Log > View Log
Log
Select Incoming Log, Outgoing Log, Security
Type
•
Log, or DHCP Client Log.
The Incoming Log will display a
<Type> Log
•
temporary log of the source IP addresses and
destination port numbers for the incoming Internet
traffic. The Outgoing Log will display a temporary
log of the local IP addresses, destination URLs/IP
addresses, and service/port numbers for the outgoing
Internet traffic. The Security log will display the login
information for the web-based utility. The DHCP
Client Log will display the LAN DHCP server status
information.
Click Save the Log to save this information to a file
on your PC's hard drive. Click Refresh to update the
log. Click Clear to clear all the information that is
displayed.
Click Save Settings to apply your changes, or click Cancel
Changes to cancel your changes.
Administration > Diagnostics
The diagnostic tests (Ping and Traceroute) allow you to
check the connections of your network devices, including
connection to the Internet.
Administration > Diagnostics
24