Linksys WRT160N User Manual page 16

Chapter 3
Security Mode > WPA2 Enterprise
WPA2 supports two encryption methods,
Encryption
TKIP and AES, with dynamic encryption keys. Select the
type of algorithm, AES or TKIP or AES. The default is TKIP
or AES.
Enter the IP Address of the RADIUS
RADIUS Server
server.
Enter the port number of the RADIUS
RADIUS Port
server. The default value is 1812.
Enter the key shared between the Router
Shared Secret
and the server.
Enter a Key Renewal period, which instructs
Key Renewal
the Router how often it should change the encryption
keys. The default Key Renewal period is 3600 seconds.
RADIUS
This option features WEP used in coordination with a
RADIUS server. (This should only be used when a RADIUS
server is connected to the Router.)
Security Mode > RADIUS
Wireless-N Broadband Router
Advanced Configuration
If you are using WEP encryption,
IMPORTANT:
always remember that each device in your
wireless network MUST use the same WEP
encryption method and encryption key, or else
your wireless network will not function properly.
Enter the IP Address of the RADIUS
RADIUS Server
server.
Enter the port number of the RADIUS
RADIUS Port
server. The default value is 1812.
Enter the key shared between the Router
Shared Secret
and the server.
Select a level
Encryption
40/64 bits (10 hex digits) or 104/128 bits (26 hex digits).
The default is 40/64 bits (10 hex digits).
Enter a Passphrase to automatically generate
Passphrase
WEP keys. Then click Generate.
If you did not enter a Passphrase, enter the WEP
Key 1-4
key(s) manually.
Select which TX (Transmit) Key to use. The default
TX Key
is 1.
WEP
WEP is a basic encryption method, which is not as secure
as WPA.
Security Mode > WEP
Select a level
Encryption
40/64 bits (10 hex digits) or 104/128 bits (26 hex digits).
The default is 40/64 bits (10 hex digits).
Enter a Passphrase to automatically generate
Passphrase
WEP keys. Then click Generate.
If you did not enter a Passphrase, enter the WEP
Key 1-4
key(s) manually.
Select which TX (Transmit) Key to use. The default
TX Key
is 1.
Click Save Settings to apply your changes, or click Cancel
Changes to cancel your changes.
of WEP encryption,
of WEP encryption,
14