Enable Security Event Email Notification - NETGEAR N150 User Manual

Enable Security Event Email Notification

To receive logs and alerts by email, provide your email information in the E-mail screen and
specify which alerts you want to receive and how often.

To enable email notification:
Select Security > E-mail to display the following screen:
1.
Fill in the fields as follows:
2.
Turn E-mail Notification On. Select this check box if you want to receive email logs and
alerts from the wireless modem router.
Send To This E-mail Address. Enter the email address where you want logs and alerts
sent. This email address is also used as the From address. If you leave this field blank,
log and alert messages are not sent by email.
Outgoing Mail Server. Enter the name or IP address of your ISP's outgoing (SMTP) mail
server (such as mail.myISP.com). You might be able to find this information in the
configuration settings of your email program. Enter the email address to which logs and
alerts are sent. This email address is also used as the From address. If you leave this
field blank, log and alert messages are not sent by e-mail.
My Mail Server requires authentication. If you use an outgoing mail server provided by
your current ISP, you do not need to select this field. If you use an email account that is
not provided by your ISP, select this field, and enter the required user name and
password information.
N150 Wireless ADSL2+ Modem Router DGN1000
Security Settings
58