Table of Contents
Advertisement
Log In to the N150 Modem Router
Log in to the wireless modem router to view or change settings or to set up the wireless
modem router.
To log in:
Type http://192.168.0.1 in the address field of your browser and press Enter to display
1.
the login window. You can also enter either of these addresses to access the wireless
modem router: http://www.routerlogin.net or http://www.routerlogin.com.
When prompted, enter admin for the router user name and password for the router
2.
password, both in lowercase letters.
The router user name and password are probably different from the
Note:
user name and password for logging in to your Internet connection.
See
Types of Logins
The router menus display where you can do things like change settings or add other
devices to your network. See
available functionality, and
information about adding devices to your network.
If you do not see the login prompt:
Check the LEDs on the router front panel to make sure that the modem router is plugged
1.
into an electrical outlet, its power is on, and the Ethernet cable between your computer
and the router is connected to a LAN port.
If you connected the Ethernet cable and quickly launched your browser and typed in the
2.
router URL, your computer might need a minute or two to recognize the LAN connection.
Relaunch your browser and try again.
N150 Wireless ADSL2+ Modem Router DGN1000
on page 30 for more information.
Router Interface
Wi-Fi Protected Setup (WPS) Method
Router Internet Setup
21
admin
********
on page 23 for a brief description of the
on page 35 for
Advertisement
Table of Contents
