Table of Contents
Advertisement
Operating Your Camera
- XPOS : Determines the coordinate of the horizontal axis for SEL POS.
- FILL → SET : Fills in a selected MD area. The color of filling is sequentially selected as brown,
orange, blue, cyan, yellowish green, yellow, magenta and red.
- RETURN : Select this to save the MOTION DET menu settings and return to the SPECIAL menu.
Notes
• M D areas show only MOTION DET menu. Therefore, MD areas don't display on the
monitor screen.
PRIVACY : Mask an area you want to hide on the screen,
... ... ... When the SPECIAL menu screen is displayed, press
the Function Setup switch so that the arrow
indicates 'PRIVACY'.
... ... ... Set up the mode using the Function Setup switch.
- AREA SEL : You can select up to 8 PRIVACY areas.
- AREA MODE : Determines whether to use the area selected
in the AREA SEL, and the size and position
of the area.
- MASK COLOR : Determine area color. You can select Gray,
Black and White
- TRANSP : Determine the transparency of selected area as
controlling number from 0 to 3.
- RETURN : Select this to save the PRIVACY menu settings and return to the SPECIAL menu.
DIS (Digital Image Stabilizer) :
This function mitigates any picture movement due to external factors such as wind.
Notes
• As the DIS function uses the digital zoom the camera's resolution will decrease.
• DIS doesn't operate when background illumination is too low.
• DIS doesn't operate when object pattern is monotonic as like sky or white wall.
• If DIS is enabled, the digital zoom is not configured to less than 46 level.
26
COLOR DOME CAMERA
User's Manual
LANGUAGE :
You can select the menu language according to your requirements.
IR MODE :
When IR LED is turned on in B/W, the objects can be
clearly identified due to the function that decreases
screen saturation of objects within a short distance.
- OFF : disabled Used to view clearly in dark
environments such as warehouse and outer
area.
- ON : IR MODE enabled
- TOP/DOWN/LEFT/RIGHT: Adjust the range according to the location of objects.
Notes
• IR MODE function does not work in D&N COLOR mode.
RESET :
Resets the camera settings to the factory defaults. Language is not initialized.
RETURN :
Select this to save the SPECIAL menu settings and return to the MAIN SETUP menu.
EXIT
Press the Function Setup switch in the EXIT menu to save the current settings and exit the
MAIN SETUP menu.
COLOR DOME CAMERA
27
User's Manual
Advertisement
Table of Contents
