Turning Your Phone On And Off - Sanyo PRO-700 User Manual

Turning Your Phone On and Off

Turning Your Phone On
Press
Once your phone is on, it displays "Looking for service..."
which indicates that your phone is searching for a signal.
When your phone finds a signal, it automatically enters
standby mode. At this point, you are ready to begin making
and receiving calls.
If your phone is unable to find a signal after 15 minutes of
searching, a Power Save feature is automatically activated.
When a signal is found, your phone automatically returns to
standby mode.
In Power Save mode, your phone searches for a signal
periodically without your intervention. You can also initiate a
search for service by pressing any key (when your phone is
turned on).
Tip: The Power Save feature helps to conserve your battery power when you
are in an area where there is no signal.
Turning Your Phone Off
Press and hold
powering down animation on the display screen.
Your screen remains blank while your phone is off (unless the
battery is charging).
8
.
for two seconds until you see the