Settings; Access Codes; Software Updates - Nokia 5800 XpressMusic User Manual

able to request these updates through the Nokia Software
Updater PC application. Software updates may not be
available for all products or their variants. Not all operators
may endorse the latest software versions available.
To update the device software, you need the Nokia Software
Updater application and a compatible PC with the Microsoft
Windows 2000, XP, or Vista operating system, broadband
internet access, and a compatible data cable to connect your
device to the PC.
Warning: If you install a software update, you cannot
use the device, even to make emergency calls, until the
installation is completed and the device is restarted. Be sure
to back up data before accepting installation of an update.
To get more information and to download the Nokia
Software Updater application, visitwww.nokia.com/
softwareupdate or your local Nokia website.
If software updates over the air are supported by your
network, you may also be able to request updates through
the device.
Downloading software updates may involve the transmission
of large amounts of data through your service provider's
network. Contact your service provider for information about
data transmission charges.
Make sure that the device battery has enough power, or
connect the charger before starting the update.
Tip: To check the software version in your device,
select Menu

Settings

>
mgmt. Device
>
© 2008 Nokia. All rights reserved.
and Phone Phone
>
updates.
Settings
Your device normally has MMS, GPRS, streaming, and mobile
internet settings automatically configured in the device,
based on your network service provider information. You
may have settings from your service providers already
installed in your device, or you may receive or request the
settings from the network service providers as a special
message.

Access codes

If you forget any of the access codes, contact your service
provider.
● Personal identification number (PIN) code — This code
protects your SIM card against unauthorised use. The PIN
code (4 to 8 digits) is usually supplied with the SIM card.
After three consecutive incorrect PIN code entries, the
code is blocked, and you need the PUK code to unblock it.
● UPIN code — This code may be supplied with the USIM
card. The USIM card is an enhanced version of the SIM card
and is supported by UMTS mobile phones.
● PIN2 code — This code (4 to 8 digits) is supplied with some
SIM cards, and is required to access some functions in your
device.
● Lock code (also known as security code) — The lock code
(5 digits) helps you to protect your device against
unauthorised use. The preset code is 12345. You can create
and change the code, and set the device to request the
code. Keep the new code secret and in a safe place
separate from your device. If you forget the code and your
device is locked, your device will require service and
Find help
19