Maintenance Schedule - Husqvarna 356 BT X-series Operator's Manual

Maintenance schedule

Below you will find some general maintenance instructions. If
you need further information please contact your service
workshop.
Daily maintenance
1 Clean the outside of the machine.
2 Check that the throttle control functions safely.
3 Check that the stop switch works correctly.
4 Check that nuts and screws are tight.
5 Check that there are no fuel leaks.
Weekly maintenance
1 Clean the air filter. Replace if necessary.
2 Clean the outside of the spark plug. Remove and check
the electrode gap. Adjust the gap to 0.5 mm or change the
spark plug.
3 Clean the cooling system.
Monthly maintenance
1 Check fuel hose for cracks or other damage. Change if
necessary.
2 Check all cables and connections.
3 Replace the spark plug. Check that the spark plug is fitted
with a suppressor.
4 Check and clean the spark arrestor screen on the muffler.
5 Check that the vibration damping elements are not
damaged.
6 Clean the fuel tank.
IMPORTANT!
Use only HUSQVARNA replacement parts. Use of other
brands of replacement parts can cause damage to your unit
or injury to the operator or others. Your warranty does not
cover damage or liability caused by the use of accessories
and/or attachments not specifically recommended by
HUSQVARNA.
MAINTENANCE
– 17
English