Insert A Microsd Card; Remove The Microsd Card; Charge The Battery - Nokia 6700 classic User Manual

10 Get started

Insert a microSD card

Use only compatible microSD cards
approved by Nokia for use with this
device. Nokia uses approved industry
standards for memory cards, but some
brands may not be fully compatible with
this device. Incompatible cards may
damage the card and the device and
corrupt data stored on the card.
Your phone supports microSD cards of up
to 8 GB.
1 Remove the back cover.
2 Insert the card into the microSD card
slot with the contact surface facing
down.
3 Replace the back cover.

Remove the microSD card

1 Remove the back cover of the device.
2 Pull the card out.

Charge the battery

Your battery has been precharged, but the
charging levels may vary.
1 Connect the charger to a wall outlet.
2 Connect the charger to the device.
3 When the battery is fully charged,
disconnect the charger from the
device, then from the wall outlet.
You also may charge the battery with a
USB cable with power from a computer.
1 Connect the USB cable to the USB port
of a computer and to your device.
2 When the battery is fully charged,
disconnect the USB cable.
If the battery is completely discharged, it
may take several minutes before the
charging indicator appears on the display
or before any calls can be made.
The charging time depends on the charger
used. Charging a BL-6Q battery with the
AC-8, AC-15 charger takes approximately
1 hour 25 minutes while the phone is in
the home screen mode.