Connecting To A Macintosh Desktop Pc - LG LP-XG2 Owner's Manual

Connecting to a Macintosh Desktop PC

* You must use the Macintosh desktop adaptor to connect the projector to a Macintosh PC.
< How to connect >
a. Connect either end of the computer cable to Computer In of the projector.
b. Connect the monitor cable from the Macintosh monitor to Computer Out of the projector if you want to
see the projected image on Macintosh monitor.
c. Set the adjusting number and letter of the Macintosh desktop adaptor in accordance with the resolution
you want to use and connect the adaptor to the Macintosh. (Refer to page 18 ~ 19)
d. Connect the computer cable to the Macintosh desktop adaptor.
e. Connect the audio cable from the PC to Computer Audio of the projector.
f. Connect the mouse cable(4 pin) from the Macintosh mouse port to the Mouse of the projector.
17
c
d
Mouse
Computer
Computer Out Audio
R Audio L/MONO
K
b
f
e
Computer In
Video S-Video
a