Front Turn Signal And Parking Lamps (Sedan) - Pontiac Wave 2008 Owner's Manual

Front Turn Signal and Parking
Lamps (Sedan)
To replace a front turn signal or parking lamp bulb:
1. Open the hood. See Hood Release on page 5-10
for more information.
2. Remove the headlamp assembly. See Steps 2
through 4 under Headlamps (Hatchback) on
page 5-44 or Headlamps (Sedan) on page 5-46
for instructions on how to remove the headlamp
assembly.
3. Turn the front turn signal bulb socket
counterclockwise.
5-48
4. Pull the front turn signal bulb socket out of the lamp
housing.
5. Press the bulb inward and turn it counterclockwise
to remove it from the bulb socket.
6. Install the new bulb into the socket by pressing it in
and turning it clockwise.
7. Install the socket into the lamp housing by turning it
clockwise.
8. Reverse Steps 1 through 2 under Headlamps
(Hatchback) on page 5-44 or Headlamps (Sedan)
on page 5-46 to install the assembly.