3Com Switch 7700 Configuration Manual page 27

Switch
Hide thumbs Also See for Switch 7700:
Table of Contents

Advertisement

Perform the following configuration in user view.
Table 15 Configure to Send Messages Between User Interfaces
Operation
Configure to send messages between
different user interfaces.
The auto-execute Command is used to run a command automatically after
you log in. The command is automatically executed when you log in again. See
Table 16.
This command is usually used to execute the telnet command automatically on a
terminal, which connects the user to a designated device.
Perform the following configuration in user interface view.
Table 16 Configure Automatic Command Execution
Operation
Configure to automatically run the command
Configure not to automatically run the
command
After applying the auto-execute command, the user interface can no longer be
used to carry out the routine configurations for the local system.
Make sure that you will be able to log in to the system in some other way and
cancel the configuration before you use the auto-execute command and save
the configuration.
Telnet 10.110.100.1 after the user logs in through VTY0 automatically.:
[SW7700-ui-vty0] auto-execute command telnet 10.110.100.1
When a user logs on by VTY 0, the system will run
automatically.
Displaying and Debugging User Interface
After creating the previous configuration, execute the display command in all
views to display the user interface configuration, and to verify the effect of the
configuration. Execute the free command in user view to clear a specified user
interface.
Table 17 Display and Debug User Interface
Operation
Clear a specified user interface
Display the user application information of the
user interface
Display the physical attributes and some
configurations of the user interface
See Table 17.
Setting Terminal Parameters
Command
send { all | number | type number }
Command
auto-execute command text
undo auto-execute command
telnet 10.110.100.1
Command
free user-interface [ type ] number
display users [ all ]
display user-interface [ type number ] [
number ] [summary]
19

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents