General problems
Problem
The display is dark.
The buzzer sounds
during a programme.
The following fault
message appears in
the display:
Close the salt reservoir
The following fault
message appears in
the display:
Middle spray arm
blocked
or
Bottom spray arm
blocked
Possible cause
The display has
switched off
automatically to save
energy (Standby mode).
The salt reservoir has
not been closed
properly.
Items are blocking the
path of the middle or
the bottom spray arm.
The middle or bottom
spray arm jets are
blocked.
Problem solving guide
Remedy
Press any button.
Stand-by comes to an end.
– Close the flap to the salt
reservoir properly.
If the salt reservoir flap has
come undone during a
programme, you must:
– Switch the dishwasher off
with the Off button o and
then back on again.
– Start the programme again.
Open the dishwasher door
and rearrange the items
which are obstructing the
spray arm.
– Switch the dishwasher off
with the Off button o.
Then:
– Clean the spray arm. See
Cleaning and care.
51