Messages & Alerts; System Messages - Garmin GPSMAP 695 Quick Reference Manual

Portable aviation receiver
Hide thumbs Also See for GPSMAP 695:
Table of Contents

Advertisement

Messages & Alerts
MeSSAgeS & ALertS

SySteM MeSSAgeS

• Antenna Shorted to Ground—the external GPS antenna has an electrical
connection problem. Contact Garmin Product Support.
• Approaching Target Altitude—within 1,000 feet of final VNAV target altitude.
• Approaching VNAV Profile—the aircraft is within one minute of reaching the
initial VNAV descent point.
• Arriving at XXX—the aircraft is nearing the destination.
• Battery Low—the battery needs to be recharged.
• Can't Unlock Maps—no applicable unlock code for one or more maps was found.
All MapSource maps are not accessible.
• Check XM Antenna—internal problem with your GXM 40 antenna. Contact
Garmin Product Support.
• Database Error—internal problem with the unit. Contact your dealer or Garmin
Product Support to have the unit repaired.
• Switch Fuel Tanks—a reminder for switching fuel tanks. The reminder message
repeats at the specified interval after the beginning of each trip.
• Lost Satellite Reception—the unit is unable to receive satellite signals.
• Memory Full—unit memory is full, no further data can be saved.
• Near Proximity Point—the aircraft has reached the distance set for a proximity
waypoint.
• Next DTK XXX—the aircraft is nearing a turn in a route.
• No XM Signal—the GXM 40 antenna is not receiving an XM signal.
• Proximity Memory Full—no additional proximity waypoints can be saved.
• Proximity Radius Overlaps—the radius of two proximity waypoints overlap.
• Route Already Exists—a route name that already exists has been entered.
20
Garmin GPSMAP 695/696 Quick Reference Guide
190-00959-00 Rev. A

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Gpsmap 696

Table of Contents