Page of 7
Download Bookmark Comment

Hunter 47110A Owner's Manual

Hunter owners manual programmable thermostat 47110a.
Programmable Thermostat
Owners Manual
Model 47110A

   Related Manuals for Hunter 47110A

   Summary of Contents for Hunter 47110A

  • Page 1

    ® Programmable Thermostat Owners Manual Model 47110A...

  • Page 2

    Congratulations! Your new Hunter thermostat will provide years of reliable service. By saving energy, your thermostat will pay for itself during its first season of use. Thank you for buying a Hunter product! Please read this manual for complete instructions on installing and operating your thermostat.

  • Page 3

    If hole in wall is larger than necessary for wires, seal this hole with insulating material so that no hot or cold air can enter the back of the thermostat from the wall. This air could cause a false thermostat reading.

  • Page 4

    Fan come on as expected after installation. If the Fan operation is normal, leave it in the “HG” position. If the Fan does not come on within a minute of the thermostat calling for heat, change the switch position to “HE”. The system selector has no effect in the cooling mode.

  • Page 5

    12 Hr. / 24 Hr. Time Format Your thermostat is set from the factory in normal 12 (AM / PM) time format. To change to 24 hour (military) time, press program at any time while the Hour, Minute, or Day is flashing to toggle between the 12 hour and 24 hour formats.

  • Page 6

    3 seconds. SPAN Setting Mode Your thermostat is set at the factory to cycle at 0.5˚C (1 F) above and below the set tempera- ture. (Span = 2) This setting has been designed to provide a comfortable room temperature under most all conditions.

  • Page 7

    Auto Cut Off Your thermostat will automatically cut-off in Heat mode if the room temperature rises above 35˚C (95 F). It will cut-off in Cool mode if the room temperature drops below 4˚C (40 F). Note that if your system has malfunctioned and no longer responds to thermostat controls, the Auto Cut-Off will have no effect.

Comments to this Manuals

Symbols: 0
Latest comments: