Related Manuals for LevelOne PLI-2030
Summary of Contents for LevelOne PLI-2030
-
Page 1: User Manual
LevelOne PLI-2030 200Mbps HomePlug AV Ethernet Bridge User Manual V1.0.0-0611... -
Page 2: Homeplug Powerline
HomePlug Powerline HomePlug powerline is an excellent solution that can be used to extend your network. In the home or small office building, use HomePlug Ethernet Bridge Adapters to link multiple locations without the need to run Ethernet cable. Combined with a broadband DSL/Cable connection, every room with electrical power outlets will have easy access to high-speed Internet connection. - Page 3 5. Follow the prompts to install the PLI-2030 utility. 6. Microsoft .NET Framework 1.1 is needed for installing PLI-2030 utility. The wizard will check automatically whether the Microsoft .NET Framework 1.1 was installed on your PC or not. If not, the wizard will pop up a message box.
- Page 4 7. Once installation is completed, run the PLI-2030 utility program. The first screen (Network Tab) will display in- formation of the compatible devices found, such as their MAC Addresses and current transfer speeds. Choose the desired device from the Device Selection, and the information of the selected device will be dis- played in the table.
- Page 5 • On this screen, you can also click Use default to use the 200Mbps HomePlug AV Ethernet Bridge's default Network Key. 10. Click Close to exit the PLI-2030 utility. Setup is now complete. If your PC is not the device you wish to use with the 200Mbps HomePlug AV Ethernet Bridge, connect the Ethernet cable from the 200Mbps HomePlug AV Ethernet Bridge to the desired device.
-
Page 6: Operation
• Each HomePlug device must use the same Network Key. You can use the Encryption tab of the PLI-2030 utility to assign a Network Key to other HomePlug devices. • 200Mbps HomePlug AV Ethernet Bridge works better when plugged into the wall socket. Connect the 200Mbps HomePlug AV Ethernet Bridge into the power strip or surge protectors may degrade the network performance.