FujiFilm FINEPIX S9400W Series Basic Manual page 164

Miscellaneous
Problem Problem
Nothing happens
when the shutter but-
ton is pressed.
The camera does not
function as expected.
I want to use an AC
power adapter and DC
coupler overseas.
Hue or content of
display changes unex-
pectedly.
Date and time added
by S DATE STAMP
are not correct.
Date and time are
added to the pictures.
116
Possible cause Possible cause
Temporary camera malfunction.
The batteries are exhausted.
Temporary camera malfunction.
Check the label on the AC power adapter.
ON is selected for MONITOR SUNLIGHT MODE.
The camera clock is not correctly set.
T + U or T is selected for S DATE STAMP
option.
Solution Solution
Remove and reinsert the batteries or discon-
nect and reconnect the AC power adapter/
DC coupler.
Insert fresh or fully-charged spare batteries.
Remove and reinsert the batteries or discon-
nect and reconnect the AC power adapter/
DC coupler. If the problem persists, contact
your FUJIFILM dealer.
The AC power adapter can be used with volt-
ages of 100–240 V and power frequency of
50/60Hz. However, power outlets differ de-
pending on the regions. Consult your travel
agent for information on plug adapters.
Choose OFF for MONITOR SUNLIGHT MODE.
Reset the date and time.
Added shooting date and time can not
be deleted from the pictures. To take pic-
tures without date and time, select OFF for
S DATE STAMP.
Troubleshooting
Page Page
9
9
9
—
6
15
105