Motorola GP540 User Manual page 31

4c. If there are 10 or more members in the list,
the display shows "ID LOC#X_" (where X is
the first digit). The cursor blinks to show the
location of the second digit.
4d. Enter the second digit of the location number.
4e. The radio goes to that
position in the list. The
display alternates
between showing the
member's name and ID
number.
Note: The last member of the list is also the "last ID
transmitted or received" at position "00" on the
list.
• If you enter a location number that does not
exist (for example, "15"), the display will show
"INVALID ENTRY," and the radio will sound an
invalid-keypress tone and return back to step 4b
of this procedure.
Sending the Radio ID Number
5. Press the PTT switch to transmit the ID
number.
6. If the radio you are calling is on the air, you will
hear a telephone-type ringing for 20 seconds,
or until the called radio answers the call.
Alternates between
JB SMITH
and
ID: 784116
Note: If the radio you are calling is not in service,
Having the Conversation and Hanging-up
10. When finished with your conversation, or if the
7. If the party you are
calling does not answer
the call within twenty
seconds, the telephone
ringing stops and an
alert tone sounds.
At this point you can either send a Call Alert
page, or go to step 10 to hang up.
8. If the party you are calling answers the call,
you will hear his/her voice.
you will not hear the ringing and the display will
show "NO ACK". Go to step 10 to hang up.
• If your radio is configured for Private Call II,
you will not hear the telephone type ringing.
Instead you are able to proceed to talk to the
Called party.
9. Press the PTT switch to have a Private
Conversation with the called person.
radio you called does not answer or is not in
service, press . to hang up.
NO ANSWER
English
27