Mechanical Instructions - Philips PET702 Service Manual

4.0 MECHANICAL INSTRUCTION
1. Remove 8pcs of screws on the side of bottom cabinet.
2. up-plug all the wire connecter from main board,
The wire connectors are for: DVD loader, battery board
and TFT driver board, and speaker.
3. up-plug the FFC from DVD driver, then you can take out
the DVD Driver.
Remove all the screws on the main board, then take the
main board from bottom cabinet.
4.
Remove the flex cable on the bottom side.
5. Remove all the screws on the buttery board, then take
out the buttery with buttery board.