Advertisement
Connecting the v
Connecting the v
•Check the vehicle speed pulse signal, parking brake signal, and reverse signal carefully before making the
connections. If the cables are incorrectly connected, accidents or problems with correct operation may result.
•The label on the vehicle speed pulse signal cable contains a protection circuit, so do not cut the cable or remove
the protective circuit, otherwise problems with operation may result.
•Bind the cables together with tape so that they do not cause an obstruction while driving. If they become wound or
entageled around parts such as the steering wheel, shifting lever, or brake pedal, accidents may result.
Tip
The locations where the vehicle speed pulse signal cable may vary depending on the vehicle model and grade. Ask
the car dealer or your nearest ECLIPSE dealer for details.
- Connecting point for the vehicle speed pulse signal (example) -
Tip
Always be sure to connect the vehicle speed pulse,
otherwise the measurement precision will be greatly
reduced.
1
Use a splicing connector to connect the vehicle speed
pulse signal cable (purple/white) coming from the main
unit to the vehicle speed pulse signal cable of the
vehicle.
2
Route the vehicle speed pulse signal cable to the main
unit.
- Connecting the point for parking brake (example) -
1
Use a splicing connector to connect the parking brake
signal cable (red/white) coming from the main unit to
the parking brake signal cable of the vehicle.
2
Route the parking brake signal cable to the main unit.
ehicle speed pulse
ehicle speed pulse
Notes on installation
Vehicle speed pulse
signal cable (vehicle harness)
Hand-operated
parking brake
- 8 -
Engine computer
7
Vehicle speed pulse signal
cable (purple/white) of
connection cable
Parking brake
signal cable
Foot-operated
parking brake
Parking brake
signal cable
Attach a splicing
connector at this location
Parking brake
signal cable
Advertisement
