Headlamp High/Low-Beam Changer; Windshield Wipers - Chevrolet 2005 Equinox Owner's Manual

Headlamp High/Low-Beam Changer

To change the headlamps from low beam to high or
high beam to low, pull the turn signal lever all the way
towards you. Then release it.

Windshield Wipers

Be sure to clear ice and snow from the wiper blades
before using them. If the wiper blades are frozen to the
windshield, gently loosen or thaw them. If the blades
do become damaged, install new blades or blade
inserts.
Heavy snow or ice can overload the wiper motor. A
circuit breaker will stop the motor until it cools down.
Clear away snow or ice to prevent an overload.
3-8
When the high beams are
on, this light on the
instrument panel cluster
will also be on.
United States
The lever on the right side of the steering column
operates the windshield wipers. Push up or pull down
on the lever to place it in one of the following positions.
Canada