Dvd And Video Cd Operation - LG LH-R5500SB Owner's Manual

DVD and Video CD Operation

DVD or Video CD Playback
Playback Setup
Turn the TV on and select the video input source con-
nected to the DVD Recorder Receiver.
Audio System: Turn the Audio System on and select
the input source connected to the DVD Recorder
Receiver.
1 1
Press OPEN/CLOSE (Z) to open the disc tray.
2 2
Load your chosen disc in the tray, with the
playback side down.
3 3
Press OPEN/CLOSE (Z) to close the tray.
READING appears on the display window, and
playback starts automatically. If playback does not
start, press B (PLAY).
In some cases, the disc menu might appear
instead.
Tip
If a menu is displayed
A menu may be displayed first after loading a DVD or
Video CD that contains a menu.
DVD
Use the b B v V buttons to select the title/chapter you
want to view, then press ENTER to start playback.
Press TITLE or MENU/LIST to return to the menu
display.
VCD
Use the number buttons to select the track you want
to view.
Press RETURN (O) to return to the menu display.
Menu setting and the exact operating procedures for
using the menu may differ depending on the disc.
Follow the instructions on each menu screen.
You may also set PBC to OFF in the Setup menu.
See page 28.
Notes :
– If Parental Control is set and the disc is not within the
Rating settings (not authorized), the 4-digit code must
be entered and/or the disc must be authorized (see
"Rating", on page 29).
– DVDs may have a Region Code.
Your recorder will not play discs that have a region
code different from your recorder. The region code for
this Recorder is 2 (two).
General Features
Note :
Unless stated otherwise, all operations described use
the Remote Control. Some features may also be avail-
able on the Setup menu.
TITLE Selection
DVD Video VR
If a disc has more than one title, you can move to
another title as follows:
Press DISPLAY then use v / V to select the title
icon. Then, press the appropriate numbered button
(0-9) or b / B to select a title number.
CHAPTER/TRACK Selection
If a title on a disc has more than one chapter/track, you
can move to another chapter/track as follows:
Press SKIP (. or >) briefly during playback to
select the next chapter/track or to return to the begin-
ning of the current chapter/track.
Press SKIP (.) twice briefly to step back to the
previous chapter/track.
To go directly to any chapter/track during playback,
press DISPLAY. Then, use v / V to select chapter
icon (or for a Video CD, select track icon). Then, enter
the chapter/track number using the numbered buttons
(0-9) or press b / B.
Search
1. Press SCAN (m or M) during playback.
2. Press SCAN (m or M) repeatedly to select the
required speed.
DVD, DivX; 4 steps (forward and backward)
Video CD; 3 steps (forward and backward)
3. To exit SEARCH mode, press B (PLAY).
Still Picture and Frame-by-Frame Playback
1. Press PAUSE/STEP (X) on the remote control dur-
ing playback. Advance the picture frame-by-frame by
pressing PAUSE/STEP (X) repeatedly.
2. To exit PAUSE mode, press B (PLAY).
+RW +R
35