Pre-Operation Setup; Initial Settings; General; Auto Programming - LG LH-R5500SB Owner's Manual

Pre-operation Setup

Initial Settings

In this menu system, there are several ways to cus-
tomize the settings provided. Most menus consist of
three levels to set up the options, but some require
greater depth for the variety of settings. If you press
SETUP, only the first and second level of the menu
system will appear on the TV screen. The third level can
be displayed by pressing B. For navigating the menu
levels, you will see "B" on the right side of the menu
label to help you go to the next level.
To bring up and exit the Menu:
Press SETUP to bring up the menu. A second press of
SETUP will take you back to initial screen.
To go to the next level:
Press B on the remote control.
To go back to the previous level:
Press b on the remote control.
General Operation
1 1
Press SETUP.
The Setup menu appears.
2 2
Use v / V to select the desired option.
3 3
While the desired item is selected, press B to
move to the second level.
4 4
Use v / V to select the second desired option.
5 5
Press B to move to the third level.
6 6
Use v / V to select the desired setting then
press ENTER to confirm your selection.
Some items require additional steps.
7 7
Press SETUP to exit the Setup menu.

General

Auto Programming

This DVD Recorder Receiver is equipped with a
frequency synthesized tuner capable of receiving
up to 88 TV channels.
Preparation:
Connect the DVD Recorder Receiver to the desired
type of aerial, as shown in Connecting to the Aerial on
page 13.
1 1
Press SETUP.
The Setup menu appears.
2 2
Use v / V to select the General option.
3 3
While the General option is selected, press B to
move to the second level.
4 4
Use v / V to select the Auto Programming
option.
5 5
Press B to move to the third level.
Country option is highlighted.
6 6
Use v / V to select a country then press B.
"Start" icon is highlighted.
7 7
Press ENTER to begin the channel search.
The tuner will automatically cycle through all
available channels in the area and place them in
the tuner's memory.
Note :
After you have connected your DVD Recorder Receiver
for the very first time. If you press SETUP for initial set-
ting, you can only set the "Auto Programming" option.
Then you can set the other options.
23