Installing a Wall Mount
(Option)
DIGITAL SIGNAGE
- Only install the product on a vertical wall.
- To ensure product performance and avoid damage, it is
strongly recommended that you avoid the following
installation locations :
••
Near the sprinkler sensor, Near the heater
••
Where vibration or shock may occur
BOLT-HEX,(SP/PL)MC(+)8*20
Anchor
BOLT-HEX,TT(+)4*60(L)
••
Near high-tension wires
- Use an appropriate installation method for the material of the
wall. Check the safety of the wall surface first and reinforce the
wall if the wall strength is not enough for installation.
- Do not install the wall mount inside the wall.
1026 mm
Horizontal adjustment screw
9