Sony VPH-G90E Operating Instructions Manual page 45

Note
Be sure to terminate the PJ COM IN or OUT connector not in use by
attaching the supplied terminator.
Setting up
• Set the IN/OUT selector on the IFB-12/12A to OUT (output). The signal
input to INPUT A is output from the IFB-12/12A.
• Set the device index number of the first projector which is connected
directly to the video equipment or computer to "01," and the second
projector to "02"
(page 49
• When using the remote commander as a wireless remote control, activate
the remote control detector of a piece of the equipment in the system
only and deactivate those of the other equipment. Perform the setting on
the projector using "SIRCS RECEIVER" in the SET SETTING 2 menu
.
(page 37 )
(GB)
.
)
(GB)
Installation/connection examples
45
(GB)