G As Co Nnectio N - Miele KM 417 Operating Instructions Manual

C onnection to the gas supply , or
conversion from use of one ty pe of
gas to another should only be
undertaken by an approved fitter,
w ho is responsible for the correct
functioning of the appliance w hen
installed. E very appliance should
have its ow n isolating valve.
C heck w ith y our local gas supplier
about the ty pe of gas and its
calorific value and compare this
information w ith the ty pe of gas
q uoted on the data plate.
The gas installation must be made in
such a w ay that the isolating valve is
visible and easily accessible.
The gas hob is normally suitable for
connection to either natural or liq uid
gas. C heck suitability in y our country
w ith y our dealer or agent.

G as co nnectio n

The hob is supplied ready for
connection to natural gas.
D epending on country , a set of jets for
conversion to liq uid gas is included
w ith the hob.
C onversion to another ty pe of gas is
described in the separate Installation
Instructions.
21