Miele KM 417 Operating Instructions Manual page 19

C leaning and care
R e-assem ble th e bu rner as fo llow s
(see illu stratio n):
^ Make sure that all the locating tabs
and notches line up ex actly . P lace
the burner head c on to the burner
base f so that the ignitor and the
ignition safety control ex tend through
their respective holes in the burner
head. The burner head must click
into place correctly .
^ R eplace the burner cap b ensuring
that the locating tabs fit into the
notches in the burner head.
Important: replace parts in the correct
order after cleaning.
1 . D o not mix up the top and bottom.
2. The locating lugs must fit ex actly
into the notches.
1 9