Nokia N900 User Manual page 83

Hide thumbs Also See for N900:
Table of Contents

Advertisement

Image settings
If you change the scene mode, the white balance, exposure,
and ISO sensitivity settings are reset to defaults. The image
resolution remains the same.
1
Select
Camera
>
2
Select from the following:
White balance — Select the current lighting conditions.
Colours are reproduced more accurately.
Exposure — Adjust the exposure compensation. If you
are capturing a dark subject against a very light
background, such as snow, adjust the exposure to +1 or
to +2 to compensate for the brightness of the
background. For light subjects against a dark
background, use -1 or -2.
ISO sensitivity — Adjust the light sensitivity. Increase
the light sensitivity in low light conditions, to avoid
underexposed and out of focus images. Increasing the
light sensitivity may also increase the image noise.
Resolution — Select the image resolution.
Video settings
1
Select
> Camera.
2
Select
to switch from image mode to video mode, if
necessary.
3
Select
and from the following:
© 2010 Nokia. All rights reserved.
and
.
Capture images and record video clips
White balance — Select the current lighting conditions.
Colours are reproduced more accurately.
Exposure — Adjust the exposure compensation. If you
are filming a dark subject against a very light
background, such as snow, adjust the exposure to +1 or
to +2 to compensate for the brightness of the
background. For light subjects against a dark
background, use -1 or -2.
Resolution — Select the video resolution. Higher
resolution video clips have a larger file size.
Flash settings
Спазвайте безопасно разстояние, когато използвате
светкавицата. Не използвайте светкавицата, когато сте в
близост до хора или животни. Не покривайте
светкавицата, докато снимате.
If you change the scene mode, the flash settings are reset to
defaults.
1
Select
Camera
>
2
Select from the following:
Automatic — The flash is used automatically, if the
lighting conditions require it.
Always on — The flash is always used. Captured
images may be overexposed.
Red eye reduction — A pre-flash is used, to reduce
the red eye effect.
and
.
83

Advertisement

Table of Contents
loading

Table of Contents