Toshiba Satellite T210D Series User Manual
  1. Manuals
  2. Brands
  3. Toshiba Manuals
  4. Laptop
  5. Satellite T210D Series
  6. User manual
Toshiba Satellite T210D Series User Manual

Toshiba Satellite T210D Series User Manual

Satellite/satellite pro/portege computer
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
User's Manual
Satellite/Satellite Pro/PORTÉGÉ
T210/T210D/T230/T230D
Series

Advertisement

Table of Contents
loading

Related Manuals for Toshiba Satellite T210D Series

Summary of Contents for Toshiba Satellite T210D Series

  • Page 1 User’s Manual Satellite/Satellite Pro/PORTÉGÉ T210/T210D/T230/T230D Series...

  • Page 2: Table Of Contents

    Table of Contents Copyright..........v Disclaimer .
  • Page 3 TOSHIBA Disc Creator ........
  • Page 4 TOSHIBA support ........

  • Page 5: Copyright

    Devices, Inc. Windows, Microsoft and Windows logo are registered trademarks of Microsoft Corporation. Bluetooth is a trademark owned by its proprietor and used by TOSHIBA under license. HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC.

  • Page 6: Fcc Information

    Only peripherals complying with the FCC class B limits may be attached to this equipment. Operation with non-compliant peripherals or peripherals not recommended by TOSHIBA is likely to result in interference to radio and TV reception. Shielded cables must be used between the external devices and the computer’s external monitor port, Universal Serial Bus...

  • Page 7: Eu Declaration Of Conformity

    This product is carrying the CE-Mark in accordance with the related European Directives. Responsible for CE-Marking is TOSHIBA Europe GmbH, Hammfelddamm 8, 41460 Neuss, Germany. The complete and official EU Declaration of Conformity can be found on TOSHIBA’s web site http://epps.toshiba-teg.com on the Internet. CE compliance...

  • Page 8: Vcci Class B Information

    ■ Aircraft Environments Any consequences resulting from the use of this product in working environments that are not approved are not the responsibility of TOSHIBA. The consequences of the use of this product in non-approved working environments may be: ■...

  • Page 9: Following Information Is Only Valid For Eu-Member States

    For more detailed information about the collection and recycling programmes available in your country, please visit our website (http://eu.computers.toshiba-europe.com) or contact your local city office or the shop where you purchased the product. Disposal of batteries and/or accumulators...

  • Page 10: Reach - Compliance Statement

    The new European Union (EU) chemical regulation, REACH (Registration, Evaluation, Authorization and Restriction of Chemicals), entered into force on 1 June 2007. TOSHIBA will meet all REACH requirements and is committed to provide our customers with information about the chemical substances in our products according to REACH regulation.

  • Page 11: Preface

    This manual tells how to set up and begin using your Satellite/Satellite Pro/PORTÉGÉ T210/T210D/T230/T230D Series computer. It also provides detailed information on configuring your computer, basic operations and care, using optional devices and troubleshooting.

  • Page 12: Key Operation

    Satellite/Satellite Pro/PORTÉGÉ T210/T210D/T230/T230D Series Icons Icons identify ports, dials, and other parts of your computer. The indicator panel also uses icons to identify the components it is providing information Keys The keyboard keys are used in the text to describe many computer operations.
  • Page 13 Satellite/Satellite Pro/PORTÉGÉ T210/T210D/T230/T230D Series Terminology This term is defined in this document as follows: Start The word "Start" refers to the " " button in Windows 7. HDD or Hard disk Some models are equipped with a "Solid State drive Drive (SSD)"...

  • Page 14: General Precautions

    General Precautions TOSHIBA computers are designed to optimize safety, minimize strain and withstand the rigors of portability. However, certain precautions should be observed to further reduce the risk of personal injury or damage to the computer. Be certain to read the general precautions below and to note the cautions included in the text of the manual.

  • Page 15: Creating A Computer-Friendly Environment

    Satellite/Satellite Pro/PORTÉGÉ T210/T210D/T230/T230D Series Creating a computer-friendly environment Place the computer on a flat surface that is large enough for the computer and any other items you are using, such as a printer. Leave enough space around the computer and other equipment to provide adequate ventilation.

  • Page 16: Pressure Or Impact Damage

    Satellite/Satellite Pro/PORTÉGÉ T210/T210D/T230/T230D Series Pressure or impact damage Do not apply heavy pressure to the computer or subject it to any form of strong impact as this can damage the computer's components or otherwise cause it to malfunction. Mobile phones Please be aware that the use of mobile phones can interfere with the audio system.

  • Page 17: Equipment Checklist

    Some of the features described in this manual may not function properly if you use an operating system that was not preinstalled by TOSHIBA. Equipment checklist Carefully unpack your computer, taking care to save the box and packaging materials for future use.
  • Page 18 TOSHIBA ConfigFree™ ■ TOSHIBA HDD Protection ■ TOSHIBA Disc Creator ■ TOSHIBA Face Recognition (Is preinstalled with some models) ■ TOSHIBA eco Utility ■ TOSHIBA Bulletin Board (Is preinstalled with some models) ■ TOSHIBA ReelTime (Is preinstalled with some models) ■...
  • Page 19 Getting Started Getting Started ■ All users should be sure to read the section Starting up for the first time. ■ Be sure to read the enclosed Instruction Manual for Safety and Comfort for information on the safe and proper use of this computer. It is intended to help you be more comfortable and productive while using a notebook computer.

  • Page 20: Connecting The Ac Adaptor

    ■ Always use the TOSHIBA AC adaptor that was included with your computer, or use AC adaptors specified by TOSHIBA to avoid any risk of fire or other damage to the computer. Use of an incompatible AC adaptor could cause fire or damage to the computer possibly resulting in serious injury.
  • Page 21 2. DC output plug Figure 1-3 Connecting the DC output plug to the computer (Satellite/Satellite Pro/PORTÉGÉ T210/T210D) 3. Plug the power cord into a live wall outlet - the Battery and DC IN indicators on the front of the computer should glow.

  • Page 22: Opening The Display

    1. Display panel Figure 1-4 Opening the display panel (Satellite/Satellite Pro/PORTÉGÉ T210/T210D) Use reasonable care when opening and closing the display panel. Opening it vigorously or slamming it shut could damage the computer.

  • Page 23: Turning On The Power

    2. Press and hold the computer's power button for two or three seconds. 1. Power button Figure 1-5 Turning on the power (Satellite/Satellite Pro/PORTÉGÉ T210/T210D) Starting up for the first time The Windows 7 Startup Screen will be the first screen displayed when you turn on the power.

  • Page 24: Turning Off The Power

    Getting Started Turning off the power The power can be turned off in one of three modes, either Shut Down Mode, Hibernation Mode or Sleep Mode. Shut Down Mode When you turn off the power in Shut Down Mode, no data will be saved and the computer will boot to the operating system's main screen the next time it is turned on.
  • Page 25 Getting Started ■ Before entering Sleep Mode, be sure to save your data. ■ Do not install or remove a memory module while the computer is in Sleep Mode. The computer or the memory module could be damaged. ■ Do not remove the battery pack while the computer is in Sleep Mode (unless the computer is connected to an AC power source).

  • Page 26: Hibernation Mode

    Getting Started When you turn the power back on, you can continue where you left when you shut down the computer. ■ When the computer is in Sleep Mode, the power indicator will blink amber. ■ If you are operating the computer on battery power, you can lengthen the overall operating time by turning it off into Hibernation Mode - Sleep Mode will consume more power while the computer is off.

  • Page 27: Restarting The Computer

    Getting Started Starting Hibernation Mode You can also enable Hibernation Mode by pressing FN + F4 - please refer to Chapter 5, Keyboard, for further details. To enter Hibernation Mode, follow the steps below. 1. Click Start. 2. Point to the arrow icon ( ) and then select Hibernate from the menu.

  • Page 28: System Recovery Options

    Getting Started ■ Press the power button and hold it down for five seconds. Once the computer has turned itself off, wait between ten and fifteen seconds before turning the power on again by pressing the power button. System Recovery Options There is a hidden partition allocated on the hard disk drive for the System Recovery Options.

  • Page 29: System Recovery

    Getting Started System Recovery This section describes the creation of Recovery Media and their use. Creating Recovery Media This section describes how to create Recovery Media. ■ Be sure to connect the AC adaptor when you create Recovery Media. ■ Be sure to close all other software programs except the Recovery Media Creator.
  • Page 30 Getting Started 5. After Recovery Media Creator starts, select the type of media and the title you wish to copy, and then click the Create button. Restoring the preinstalled software from the Recovery hard disk drive A portion of the total hard disk drive space is configured as a hidden recovery partition.
  • Page 31 5. A menu will be displayed from which you should follow the on-screen instructions. When drivers/utilities are installed, you can setup the respective drivers/utilities from the following place. To open the setup files, Click Start -> All Programs -> TOSHIBA -> Applications and Drivers. User’s Manual 1-15...

  • Page 32: Chapter 2 The Grand Tour

    The following figure shows the computer’s front with its display panel in the closed position. 1. System indicators Figure 2-1 Front of the computer with display panel closed (Satellite/Satellite Pro/PORTÉGÉ T210/T210D) System indicators These LED indicators allow you to monitor the status of various computer functions and are...

  • Page 33: Left Side

    2. Cooling vents 5. Bridge media slot 3. HDMI port Figure 2-2 The left side of the computer (Satellite/Satellite Pro/PORTÉGÉ T210/T210D) DC IN 19V jack The AC adaptor connects to this jack in order to power the computer and charge its internal batteries.

  • Page 34: Right Side

    5. LAN jack 3. Universal Serial Bus (USB 2.0) ports 6. Security lock slot Figure 2-3 The right side of the computer (Satellite/Satellite Pro/PORTÉGÉ T210/T210D) Headphone jack A 3.5 mm mini headphone jack enables connection of stereo headphones. User’s Manual...

  • Page 35: Back

    Back The following figure shows the computer’s back. 1. Battery pack Figure 2-4 The back of the computer (Satellite/Satellite Pro/PORTÉGÉ T210/T210D) Battery pack The battery pack provides power to the computer when the AC adaptor is not connected. For more...

  • Page 36: Underside

    The following figure shows the underside of the computer. You should ensure that the display is closed before the computer is turned over to avoid causing any damage. Figure 2-5 The underside of the computer (Satellite/Satellite Pro/PORTÉGÉ T210/T210D) 1. Battery lock 3. Memory module slot 2. Battery release latch Figure 2-6 The underside of the computer (Satellite/Satellite Pro/PORTÉGÉ...

  • Page 37: Front With The Display Open

    This section shows the computer with the display panel open. In order to open the display, lift the display panel up and position it at a comfortable viewing angle for you. Figure 2-7 The front of the computer with the display panel open (Satellite/Satellite Pro/PORTÉGÉ T210/T210D) User’s Manual...

  • Page 38: Wireless Lan

    The Grand Tour Figure 2-8 The front of the computer with the display panel open (Satellite/Satellite Pro/PORTÉGÉ T230/T230D) 1. Wireless LAN and Wireless WAN antennas (not shown)* 7. Power button 2. Web Camera 8. LCD Sensor switch (not shown) 3. Web Camera LED 9.

  • Page 39: Video Mode

    You can use it for video chatting or video conferences using a communication tool such as Windows Live Messenger. TOSHIBA Web Camera Application will help you to add various video effects to your video or photograph.

  • Page 40: Indicators

    The Grand Tour Do not put any magnetic objects close to this switch as they may cause the computer to automatically enter Hibernation Mode and shut down even if the Panel Power Off feature is disabled. Keyboard The internal keyboard provides dedicated numeric keys, dedicated cursor control keys, and Keys.
  • Page 41 The Grand Tour DC IN The DC IN indicator normally glows white when power is being correctly supplied from the AC power adaptor. However, If the output voltage from the adaptor is abnormal, or if the computer's power supply malfunctions, this indicator will flash amber.

  • Page 42: Keyboard Indicators

    ■ When the CAPS LOCK indicator glows, the keyboard will produce capitals when any letter is typed. Figure 2-10 CAPS LOCK indicator (Satellite/Satellite Pro/PORTÉGÉ T210/T210D) 1. CAPS LOCK indicator Figure 2-11 CAPS LOCK indicator (Satellite/Satellite Pro/PORTÉGÉ T230/T230D) CAPS LOCK This indicator glows green when letter keys are locked into their uppercase format.

  • Page 43: Ac Adaptor

    Always use the TOSHIBA AC adaptor that was included with your computer, or use AC adaptors specified by TOSHIBA to avoid any risk of fire or other damage to the computer. Use of an incompatible AC adaptor could cause fire or damage to the computer possibly resulting in serious injury.

  • Page 44: Chapter 3 Hardware, Utilities And Options

    Your computer is equipped with one processor and processor type varies depending on model. To check which type of processor is included in your model, open the TOSHIBA PC Diagnostic Tool Utility by clicking Start -> All Programs -> TOSHIBA -> Utilities -> PC Diagnostic Tool.
  • Page 45 Hardware, Utilities and Options Memory Memory slots 1 GB, 2 GB or 4 GB memory modules can be installed in the computer's two memory slots for a maximum of 8 GB system memory. This computer can be equipped with memory modules of a maximum size of 8 GB.
  • Page 46 Hardware, Utilities and Options Legal Footnote (Battery Life) For more information regarding Battery Life, please refer to the Legal Footnotes section in Appendix G. RTC battery The internal RTC battery backs up the Real Time Clock (RTC) and calendar. AC adaptor The AC adaptor provides power to the system and recharges the batteries when they are low.
  • Page 47 The computer's internal display panel supports high-resolution video graphics and can be set to a wide range of viewing angles for maximum comfort and readability. ■ Satellite/Satellite Pro/PORTÉGÉ T210/T210D Display panel Series 29.5cm (11.6”) TFT LCD screen, 16 million colors, with the following resolutions: ■...
  • Page 48 Hardware, Utilities and Options 2. Select On battery from the drop-down menu in Graphics Power Plan Settings and then select the Display Power Saving Technology check box. If you want to improve the picture quality under the conditions mentioned above, adjust the setting towards Maximum Quality or disable this feature. *Please visit your region's web site or refer to the catalog for the configuration details of the model that you have purchased.
  • Page 49 You can use it for video chatting or video conferences using a communication tool such as Windows Live Messenger. TOSHIBA Web Camera Application will help you to add various video effects to your video or photograph.
  • Page 50 Hardware, Utilities and Options Wireless LAN Some computers in this series are equipped with a Wireless LAN module that is compatible with other wireless LAN systems based on Direct Sequence Spread Spectrum/Orthogonal Frequency Division Multiplexing radio technology that complies with the IEEE 802.11 Standard. Legal Footnote (Wireless LAN) For more information regarding Wireless LAN, please refer to the Legal Footnotes section in Appendix G.

  • Page 51: Special Features

    Hardware, Utilities and Options Special features The following features are either unique to TOSHIBA computers or are advanced features which make the computer more convenient to use. Access each function using the following procedures. *1 To access the Power Options, click Start -> Control Panel -> System and Security ->...
  • Page 52 Chapter 4, Operating Basics, for more details. ■ The TOSHIBA HDD Protection function does not guarantee that the hard disk drive will not be damaged. ■ TOSHIBA HDD Protection cannot be used in models that are equipped with SSD. User’s Manual...
  • Page 53 USB port when your computer is in Sleep Mode, Hibernation Mode or in the shutdown state. This function is worked by the TOSHIBA Sleep Utility. For more information, please refer to the Using the TOSHIBA Sleep and Charge Function section in Chapter 4, Operating Basics.

  • Page 54: Utilities And Applications

    TOSHIBA Flash The TOSHIBA Flash Cards provide a quick way Cards to modify selected system functions and to launch applications.
  • Page 55 TOSHIBA ConfigFree TOSHIBA ConfigFree is a suite of utilities that improve the ease and control of communication devices and network connections, help in the...
  • Page 56 Alert Utility the Disk Drive operating status and execute the system backup. To access the utility, click Start -> All Programs -> TOSHIBA -> Utilities -> HDD SSD Alert. TOSHIBA Service This application allows your computer to Station automatically search for TOSHIBA software...

  • Page 57: Optional Devices

    To access this utility, click Start -> All Programs -> TOSHIBA -> TOSHIBA Media Controller -> TOSHIBA Media Controller. For more information, please refer to the TOSHIBA Media Controller Help.

  • Page 58: Bridge Media Slot

    Hardware, Utilities and Options Peripheral devices ■ External monitor ■ eSATA device Other ■ Security lock Bridge media slot The computer is equipped with a Bridge media slot that can accommodate some kinds of memory media with various memory capacities so that you can easily transfer data from devices, such as digital cameras and Personal Digital Assistants.

  • Page 59: Memory Media

    Hardware, Utilities and Options Memory media This section provides the important safety precautions in order to handle your memory media. Points to note about the SD/SDHC/SDXC memory card SD/SDHC/SDXC memory cards comply with SDMI (Secure Digital Music Initiative), which is a technology adopted to prevent unlawful copy or playback of digital music.

  • Page 60: Memory Card Care

    Hardware, Utilities and Options Media care Observe the following precautions when handling the card. Card care ■ Do not twist or bend cards. ■ Do not expose cards to liquids or store in humid areas or lay media close to containers of liquid. ■...

  • Page 61: Removing A Memory Media

    1. Bridge media slot 2. Memory media Figure 3-2 Inserting a memory media (Satellite/Satellite Pro/PORTÉGÉ T210/T210D) ■ Make sure memory media is oriented properly before you insert it. If you insert the media in wrong direction, you may not be able to remove ■...

  • Page 62: Additional Memory Module

    1. Bridge media slot 2. Memory media Figure 3-3 Removing a memory media (Satellite/Satellite Pro/PORTÉGÉ T210/T210D) ■ Make sure the Bridge Media slot indicator is out before you remove the memory media or turn off the computer’s power. If you remove the memory media or turn off the power while the computer is accessing the memory media, you may lose data or damage the media.

  • Page 63: Installing A Memory Module

    Hardware, Utilities and Options ■ Use only memory modules approved by TOSHIBA. ■ Do not try to install or remove a memory module under the following conditions. a. The computer is turned on. b. The computer was shut down in either Sleep or Hibernation Mode.
  • Page 64 7. Align the notch of the memory module with that of the memory slot and gently insert the module into the slot at about a 45 degree angle before holding it down until the latches on either side snap into place. Figure 3-6 Seating the memory module (Satellite/Satellite Pro/PORTÉGÉ T210/T210D) User’s Manual 3-21...
  • Page 65 Hardware, Utilities and Options 1. Notch 3. Slot B 2. Slot A Figure 3-7 Seating the memory module (Satellite/Satellite Pro/PORTÉGÉ T230/T230D) ■ Never allow metal objects, such as screws, staples and paper clips, to enter the computer. Foreign metal objects can create a short circuit, which can cause computer damage and fire, possibly resulting in serious injury.

  • Page 66: Removing A Memory Module

    Hardware, Utilities and Options Figure 3-8 Seating the memory module cover (Satellite/Satellite Pro/PORTÉGÉ T210/T210D) 1. Memory module cover 2. Screw Figure 3-9 Seating the memory module cover (Satellite/Satellite Pro/PORTÉGÉ T230/T230D) 9. Install the battery pack - refer to Replacing the battery pack section in Chapter 6, Power and Power-Up Modes, if required.
  • Page 67 Do not touch the connectors on the memory module or on the computer. Debris on the connectors may cause memory access problems. Figure 3-10 Removing the memory module (Satellite/Satellite Pro/PORTÉGÉ T210/T210D) 1. Latches Figure 3-11 Removing the memory module (Satellite/Satellite Pro/PORTÉGÉ T230/T230D) User’s Manual...

  • Page 68: External Monitor

    1. External monitor port 2. Monitor cable Figure 3-12 Connecting the monitor cable to the external monitor port (Satellite/Satellite Pro/PORTÉGÉ T210/T210D) 3. Turn the external monitor's power on. 4. Turn the computer's power on. When you turn on the power, the computer will automatically recognize the monitor and determine whether it is a color or monochrome device.
  • Page 69 1. eSATA cable 2. eSATA/USB combo port Figure 3-13 Connecting an eSATA cable to the eSATA/USB combo port (Satellite/Satellite Pro/PORTÉGÉ T210/T210D) ■ A connected eSATA device may not be recognized if it is connected to the computer's eSATA/USB combo port while the computer is in Sleep Mode or Hibernation Mode.
  • Page 70 1. Plug one end of the HDMI cable into the HDMI out port of the HDMI device. 2. Plug the other end of the HDMI cable into the HDMI out port on your computer. 1. HDMI cable 2. HDMI out port Figure 3-14 Connecting the HDMI out port (Satellite/Satellite Pro/PORTÉGÉ T210/T210D) User’s Manual 3-27...
  • Page 71 Hardware, Utilities and Options When connecting or disconnecting an HDMI device to or from the computer, only do so when the computer is turned on or when the computer is completely turned off. Do not do so when the computer is in Sleep Mode or Hibernation Mode.

  • Page 72: Security Lock

    Hardware, Utilities and Options Display mode at "List All Modes" HD Format 1280 by 720, True Color (32bit), 60Herts 720p 720 by 576, True Color (32bit), 50Herts 576p 720 by 480, True Color (32bit), 60Herts 480p The above display mode is a typical HDMI display mode. The selectable display modes will vary for different HDMI monitors.

  • Page 73: Optional Accessories

    For reference, the following list details some of the items that are available from your reseller or TOSHIBA dealer: DDR3-1066/1333 A 1 GB, 2 GB or 4 GB memory module (DDR3-...

  • Page 74: Chapter 4 Operating Basics

    2. Touch Pad control buttons Figure 4-1 Touch Pad and Touch Pad control buttons (Satellite/Satellite Pro/PORTÉGÉ T210/T210D) The two buttons below the Touch Pad are used like the buttons on a standard mouse - press the left button to select a menu item or to...

  • Page 75: Web Camera

    You can use it for video chatting or video conferences using a communication tool such as Windows Live Messenger. TOSHIBA Web Camera Application will help you to add various video effects to your video or photograph.

  • Page 76: Using The Toshiba Face Recognition

    TOSHIBA does not guarantee that the face recognition utility will accurately screen out unauthorized users at all times. TOSHIBA is not liable for any failure or damage that might arise out of the use of the face recognition software or utility.
  • Page 77 Take a picture for facial verification purposes, and register the data needed when you log in. To register the data needed when you log in, follow the steps as described below: 1. To launch this utility, click Start -> All Programs -> TOSHIBA -> Utilities -> Face Recognition. ■...
  • Page 78 How to launch the help file For further information on this utility, please refer to help file. 1. To launch the help file, click Start -> All Programs -> TOSHIBA -> Utilities -> Face Recognition Help. Windows Logon via TOSHIBA Face Recognition This section explains how to login to Windows with TOSHIBA Face Recognition.

  • Page 79: Toshiba Disc Creator

    TOSHIBA Disc Creator You can use TOSHIBA Disc Creator when you connect External ODD. Please be aware of the following limitations when you use the TOSHIBA Disc Creator: ■ DVD Video cannot be created using TOSHIBA Disc Creator.

  • Page 80: Data Verification

    TOSHIBA Disc Creator cannot record in packet format. ■ You might not be able to use the "Disc Backup" function of TOSHIBA Disc Creator to back up a DVD-R, DVD-R (Dual Layer), DVD-RW, DVD+R, DVD+R (Double Layer) or DVD+RW disc that was made with other software on a different optical media recorder.

  • Page 81: Sound System

    Operating Basics How to learn more about TOSHIBA Disc Creator Please refer to the Help files for additional TOSHIBA Disc Creator information. Sound System This section describes some of the audio control functions. Adjusting System Volume You can control the overall level of sound using Windows Volume Mixer.

  • Page 82: Power Management

    Operating Basics Audio Enhancements In order to apply the sound effects for your current speaker, follow the steps below. 1. Right click on the speaker icon on the Taskbar, and select Playback devices from the sub menu. 2. Select Speakers, and click Properties. 3.
  • Page 83 Operating Basics Microphone Effects Microphone Effects are only found within Microphone window. ■ Noise Suppression reduces background noise and fan noise. ■ Acoustic Echo Cancellation reduces feedback and feedback echo. Default Format You can change the sample rate and bit depth of sound. Notes on Using Microphone You can use the built-in or an external microphone that connects to the microphone jack to record monaural sounds into your applications.

  • Page 84: Wireless Communications

    Operating Basics Wireless communications The computer’s wireless communication function supports some wireless communication devices. Only some models are equipped with both Wireless LAN and Bluetooth functions. ■ Do not use the Wireless LAN (Wi-Fi) or Bluetooth functionalities near a microwave oven or in areas subject to radio interference or magnetic fields.
  • Page 85 ■ TOSHIBA is not liable for the loss of data due to eavesdropping or illegal access through the wireless LAN and the damage thereof. Bluetooth wireless technology...

  • Page 86: Product Support

    This Bluetooth Stack is based on the Bluetooth Version 1.1/1.2/2.0+EDR/2.1+EDR specification. However, TOSHIBA cannot confirm the compatibility between any computing products and/or other electronic devices that use Bluetooth, other than TOSHIBA notebook computers. Release Notes related to the Bluetooth Stack for Windows by TOSHIBA 1.

  • Page 87: Lan

    Operating Basics Wireless communication Indicator The wireless communication indicator shows the status of the computer's wireless communication functions. Indicator status Indication Indicator off The wireless communication function is off - no wireless functionality is available. Indicator glows The wireless communication function is on. Except for the stopped device by the software switch, all the wireless-communications functions can output a radio wave.
  • Page 88 1. LAN jack 2. LAN cable Figure 4-1 Connecting the LAN cable (Satellite/Satellite Pro/PORTÉGÉ T210/T210D) 3. Plug the other end of the cable into a LAN hub connector or router. Check with your LAN administrator and hardware or software vendor before using or configuring a network connection.

  • Page 89: Computer Handling

    Operating Basics Computer Handling This section explains computer handling and maintenance. Cleaning the computer To help ensure long, trouble-free operation, keep the computer free of dust and dirt, and use care with all liquids around it. ■ Be careful not to spill liquids into the computer. If the computer does get wet, turn the power off immediately and let the computer dry completely - in these circumstance you should get the computer inspected by an authorized service provider in order to assess the scope of any...

  • Page 90: Using The Hard Disk Drive (Hdd) Protection

    The TOSHIBA HDD Protection function does not guarantee that the hard disk drive will not be damaged. ■ TOSHIBA HDD Protection cannot be used in models that are equipped with SSD. When vibration is detected, a message will be displayed on the screen, and the icon in the Taskbar notification area will change to the protection state.
  • Page 91 Operating Basics TOSHIBA HDD Protection Properties You can change the TOSHIBA HDD Protection settings by using the TOSHIBA HDD Protection Properties window. To open the window, click Start -> All Programs -> TOSHIBA -> Utilities -> HDD Protection Settings. The window can also be started from the icon on the Taskbar or from the Control Panel.

  • Page 92: Using The Toshiba Sleep And Charge Function

    Operating Basics Details To open the Details window, click the Setup Detail button in the TOSHIBA HDD Protection Properties window. Detection Level Amplification When the AC adaptor is disconnected or the lid is closed, HDD Detection assumes that the computer will be carried and sets the detection level to the maximum for 10 seconds.
  • Page 93 USB ports. Do not allow USB ports to come into contact with metal products, for example when carrying the computer in your bag. Starting the Sleep Utility To start the utility, click Start-> All Programs -> TOSHIBA -> Utilities -> Sleep Utility. Enabling Sleep and Charge This utility can be used to enable and disable the USB Sleep and Charge function.

  • Page 94: Heat Dispersal

    Operating Basics Power supply mode settings Your PC has multiple charging modes so that many different USB devices can be supported for USB Sleep and Charge function. Typical Mode (Default) is suitable for a wide range of digital audio players. However, determining which mode is suitable for your USB device is unknown without trying.

  • Page 95: Chapter 5 The Keyboard

    Chapter 5 The Keyboard The computer’s keyboard layouts are compatible with a 104/105-key enhanced keyboard - by pressing some keys in combination, all of the 104/105-key enhanced keyboard functions can be performed on the computer. The number of keys available on your keyboard will depend on which country/region your computer is configured for, with keyboards being available for numerous languages.

  • Page 96: Function Keys: F1

    Soft keys: FN key combinations The FN (function) is unique to TOSHIBA computers and is used in combination with other keys to form soft keys. Soft keys are key combinations that enable, disable or configure specific features.

  • Page 97: Hot Keys

    The Keyboard The FN key can be combined with the following keys to simulate functions similar to those of keys on the 104/105 key enhanced keyboard which are not on this computer's keyboard. Press FN + F10 or FN + F11 to access the computer's integrated keypad. When activated, the keys with grey markings on their bottom edge become either numeric keypad keys (FN + F11) or cursor control keys (FN + F10).
  • Page 98 The Keyboard Sleep: Pressing FN + F3 switches the system to Sleep Mode. Hibernate: Pressing FN + F4 switches the system to Hibernation Mode. Output: Pressing FN + F5 changes the active display device. To use a simultaneous mode, you must set the resolution of the internal display panel to match the resolution of the external display device.

  • Page 99: Windows Special Keys

    Volume up: Pressing FN + 4 increases the volume in increment. FN Sticky key You can use the TOSHIBA Accessibility Utility to make the FN key sticky, that is, you can press it once, release it, and then press an "F Number"...

  • Page 100: Keypad Overlay

    To turn on Numeric Mode, press FN + F11 - you are able to access numeric characters by using the keys. You are able to press FN + F11 again to turn off this overlay function. Figure 5-2 The numeric keypad overlay (Satellite/Satellite Pro/PORTÉGÉ T210/T210D) User’s Manual...

  • Page 101: Temporarily Changing Modes

    The Keyboard Figure 5-3 The numeric keypad overlay (Satellite/Satellite Pro/PORTÉGÉ T230/T230D) Temporarily using normal keyboard (overlay on) While using the overlay, you can temporarily access the normal keyboard functions without having to turn the overlay off: 1. Hold down FN key and press any other key - this key will operate as if the overlay were off.

  • Page 102: Generating Ascii Characters

    The Keyboard Generating ASCII characters Not all ASCII characters can be generated using normal keyboard operation, but you are able to generate these characters using their specific ASCII codes. 1. Hold down ALT with the overlay on or ALT + FN with overlay off. 2.

  • Page 103: Chapter 6 Power And Power-Up Modes

    Chapter 6 Power and Power-Up Modes The computer's power resources include the AC adaptor, battery pack and any internal batteries. This chapter provides details on making the most effective use of these resources, and includes information on charging and changing batteries, tips for saving battery power, and information on the different power-up modes.

  • Page 104: Monitoring Of Power Condition

    Power and Power-Up Modes Table 6-1 Power conditions continued Power on Power off (no operation) Battery charge • Operates adaptor is above low • LED: Battery off battery trigger DC IN off connected point Battery charge • Operates is below low •...

  • Page 105: Battery

    Power and Power-Up Modes DC IN indicator Check the DC IN indicator to determine the power status with the AC adaptor connected - the following indicator conditions should be noted: White Indicates the AC adaptor is connected and is correctly supplying power to the computer. Flashing amber Indicates a problem with the power supply.
  • Page 106 Press <F1> to resume, <F2> to Setup. You can change the Real Time Clock settings by turning the computer on while pressing the F2 key and then release the F2 key when the TOSHIBA Leading Innovation >>> screen appears. Please refer to Chapter 8 Troubleshooting for further information.

  • Page 107: Charging The Batteries

    ■ The computer's RTC battery is a Ni-MH battery and should be replaced only by your dealer or by a TOSHIBA service representative. The battery can explode if not properly replaced, used, handled or disposed. Dispose of the battery as required by local ordinances or regulations.
  • Page 108 Power and Power-Up Modes Time The following table shows the approximate time required to fully charge a discharged battery. Charging time (hours) Battery type Power on Power off Battery Pack about 12 or longer about 4 or longer (48Wh/61Wh, 6 cell) RTC battery about 24 about 24 with AC or...

  • Page 109: Monitoring Battery Capacity

    Power and Power-Up Modes Monitoring battery capacity Remaining battery power can be monitored using the following methods. ■ Clicking the battery icon on the Taskbar ■ Via the Battery Status in the Windows Mobility Center window ■ You should wait at least 16 seconds after turning on the computer before trying to monitor the remaining operating time.

  • Page 110: Retaining Data With Power Off

    Power and Power-Up Modes Retaining data with power off When you turn off your computer with fully charged batteries, the batteries retain data for the following approximate time periods. Retention time Battery type State and Retention Time Battery Pack about 1 day (Sleep Mode) (48Wh/61Wh, 6 cells) about 30 days (Shut Down Mode) RTC battery...

  • Page 111: Removing The Battery Pack

    5. Slide the battery lock into its ( ) position. 6. Slide and hold the battery release latch to disengage the battery pack and then remove it from the computer. Figure 6-1 Releasing the battery pack (Satellite/Satellite Pro/PORTÉGÉ T210/T210D) User’s Manual...

  • Page 112: Installing The Battery Pack

    1. Insert the battery pack as far as it will go into the computer. 2. Ensure that the battery pack is securely in place and the battery lock is in its lock ( ) position. Figure 6-3 Securing the battery pack (Satellite/Satellite Pro/PORTÉGÉ T210/T210D) User’s Manual 6-10...

  • Page 113: Password Utility

    Windows login password. User Password To start the utility, point to or click the following items: Start -> All Programs -> TOSHIBA -> Utilities -> TOSHIBA Assist -> SECURE -> User password ■ Registered Click to register a password of up to 8 characters. After a password is set, you will be prompted to enter it when you start the computer.

  • Page 114: Power-Up Modes

    Power and Power-Up Modes Click Start -> All Programs -> TOSHIBA -> Utilities -> TOSHIBA Assist -> SECURE -> Supervisor password This utility lets you do the following: ■ Register or delete the supervisor password. ■ Specify restrictions for general users.

  • Page 115: Panel Power On/Off

    Power and Power-Up Modes Panel power on/off You can set up your computer so that power is turned off automatically when you close the display panel, and turned on again when you open it. Please note that this function is only available for Sleep Mode or Hibernation Mode, not for Shut Down Mode.

  • Page 116: Chapter 7 Hw Setup

    Accessing HW Setup To run the HW Setup program, click Start -> All Programs -> TOSHIBA -> Utilities -> HWSetup. HW Setup window The HW Setup window contains a number of tabs (General, Password, Display, Boot Priority, Keyboard, LAN, USB and SATA) to allow specific functions of the computer to be configured.

  • Page 117: User Password

    HW Setup Setup This field displays the installed BIOS version, date and EC version. Password This option allows you to set or reset the user password for power on. User Password Lets you register a new password or change/remove an existing password. Changes or remove the password.

  • Page 118: Boot Priority

    HW Setup Display This tab lets you customize your computer’s display settings for either the internal display or an external monitor. Power On Display This tab allows you to select the display to be used when the computer is started. Please note that this setting is only available on standard VGA mode and is not available as part of the Windows Desktop properties.

  • Page 119: Boot Speed

    To change the boot drive, follow the steps below. 1. Hold down F12 and boot the computer. when the TOSHIBA Leading Innovation >>> screen appears, release the F12 key. 2. Use the up and down cursor keys to select the boot device you want and press ENTER.
  • Page 120 HW Setup Wake-up on LAN This feature lets the computer's power be turned on from shutdown when it receives a wake-up packet (Magic packet) from the LAN. Do not install or remove a memory module while Wake-up on LAN is enabled.
  • Page 121 HW Setup SATA eSATA This feature allows you to set conditions for SATA. Enables the eSATA port. (Default) Enabled Disables the eSATA port in order to save power. Disabled SATA Interface setting This feature allows you to set SATA interface setting. Let HDD/SSD work with maximum performance.

  • Page 122: Troubleshooting

    Chapter 8 Troubleshooting TOSHIBA have designed this computer for durability, however, should problems occur you are able to use the procedures detailed in this chapter to help determine the cause. All users should become familiar with this chapter as knowing what might go wrong can help prevent problems from occurring in the first place.

  • Page 123: Analyzing The Problem

    Troubleshooting ■ Before you attach an external device you should first turn the computer off, then when you turn the computer back on again it will recognize the new device. ■ Make sure all optional accessories are configured properly in the computer's setup program and that all required driver software has been loaded (please refer to the documentation included with the optional accessories for further information on its installation and...

  • Page 124: Hardware And System Checklist

    Before using a peripheral device or application software that is not an authorized TOSHIBA part or product, make sure the device or software can be used with your computer. Use of incompatible devices may cause injury or may damage your computer.

  • Page 125: Self Test

    This message remains on the screen for a few seconds. If the self test is successful, the computer tries to load the operating system according to how the Boot Priority option is set within the TOSHIBA HW Setup program. If any of the following conditions are present, the self test has failed: ■...

  • Page 126: Ac Power

    Troubleshooting If the computer has reached room temperature and it still does not start, or if it starts but shuts down quickly, contact your reseller, dealer or service provider. Computer shuts down This indicates a problem with the heat dispersal and its DC IN indicator system - you should contact your reseller, dealer is flashing white...
  • Page 127 Troubleshooting Battery If you suspect a problem with the battery, you should check the status of the DC IN indicator as well as the Battery indicator. Please refer to Chapter Power and Power-Up Modes for more information on these indicators, together with general battery operation.

  • Page 128: Real Time Clock

    BIOS setup application by using the following steps: 1. Turn on the computer while pressing the F2 key. 1. Release the F2 key when the TOSHIBA Leading Innovation >>> screen appears - the BIOS setup application will load.

  • Page 129: Internal Display Panel

    Alternatively you may wish to run the TOSHIBA PC Diagnostic Tool to check the general operation of the computer. If you are still unable to resolve the problem, contact your reseller, dealer or service provider.

  • Page 130: Hard Disk Drive

    ROM in the external optical disc drive - if so remove it and try to start the computer again. If this has no effect, check the Boot Priority setting within the TOSHIBA HW Setup utility - please refer to the Boot Priority section in Chapter 7, HW Setup for further information.

  • Page 131: Pointing Device

    Troubleshooting Problem Procedure You cannot read a file Check to ensure the required file is actually on the Memory Card that is inserted into the computer. If you are still unable to resolve the problem, contact your reseller, dealer or service provider. Pointing device If you are using a USB mouse, you should also refer to both the device...

  • Page 132: Usb Mouse

    Troubleshooting Problem Procedure The reaction of Touch Adjust the touch Sensitivity. pad is either too 1. Click Start -> Control Panel -> Hardware sensitive or not and Sound -> Mouse. sensitive enough. 2. Within the Mouse Properties window, click the Device Settings tab. 3.

  • Page 133: Usb Device

    USB, you are still able to use a USB mouse and/or USB keyboard by setting the Legacy USB Support option within the TOSHIBA HW Setup utility to Enabled. If you are still unable to resolve the problem, contact your reseller, dealer or service provider.

  • Page 134: Usb Sleep And Charge Function

    Sleep and Charge disabled. function". Select the "Enable Sleep and Charge" check box in the TOSHIBA Sleep utility to enable this function. When there is a current overflow of the external device connected to the compatible port, USB bus power (DC5V) supply may be stopped for safety reasons.

  • Page 135: Esata Device

    Troubleshooting Problem Procedure External devices Some external devices may not work when connected to the connected to a compatible port if the USB Sleep compatible ports do not and Charge function is enabled. work when connected Reconnect the external device after turning the to a compatible port.
  • Page 136 Troubleshooting Sound system In addition to the information in this section, please also refer to the documentation supplied with your audio device. Problem Procedure No sound is heard Adjust the volume. To increase the volume click the volume up button, and to decrease it click the volume down button.
  • Page 137 Troubleshooting Problem Procedure Press the FN + F5 hot key in order to change the display priority and ensure that it is not set for the internal display only. Check to see if the external monitor is connected. When the external monitor is set as the primary display device in extended desktop mode, it will not display when the computer wakes up from Sleep Mode if the external monitor has been...
  • Page 138 Troubleshooting Wireless LAN If the following procedures do not restore LAN access, consult your LAN administrator. For more information on wireless communication, refer to Chapter 4, Operating Basics. Problem Procedure Cannot access Make sure the computer's Wireless Wireless LAN communication function is on. If problems persist, contact your LAN administrator.

  • Page 139: Toshiba Support

    TOSHIBA support for assistance. TOSHIBA support If you require any additional help using your computer or if you are having problems operating the computer, you may need to contact TOSHIBA for additional technical assistance. Before you call Some problems you experience may be related to software or the operating system so it is important that you investigate other sources of assistance first.
  • Page 140 Troubleshooting Where to write If you are still unable to solve the problem and suspect that it is hardware related, write to TOSHIBA at the nearest location listed below: Outside of Europe In Europe Australia Germany & Austria TOSHIBA Australia Pty. Ltd.

  • Page 141: Specifications

    Appendix A Specifications This appendix summarizes the computer’s technical specifications. Physical Dimensions Refer to User Information Guide about Size. Environmental Requirements Conditions Ambient temperature Relative humidity Operating 5°C (41°F) to 35°C (95°F) 20% to 80% (noncondensing) Non-operating -20°C (-4°F) to 60°C (140°F) 10% to 90% (noncondensing) Wet-bulb 26°C maximum...

  • Page 142: Display Controller And Video Mode

    Appendix B Display Controller and Video mode Display controller The display controller interprets software commands into hardware commands that turn particular parts on the screen on or off. Due to the display panel's increased resolution, lines may appear broken in when displaying images in full-screen text mode.

  • Page 143: Wireless Lan

    Appendix C Wireless LAN This appendix is intended to help you get your Wireless LAN network up and running, with a minimum of parameters. Card Specifications Form Factor PCI Express Mini Card ■ IEEE 802.11 Standard for Wireless LANs Compatibility ■...

  • Page 144: Radio Characteristics

    Wireless LAN Radio Characteristics Radio Characteristics of Wireless LAN module may vary according to: ■ Country/region where the product was purchased ■ Type of product Wireless communication is often subject to local radio regulations. Although Wireless LAN wireless networking products have been designed for operation in the license-free 2.4GHz and 5GHz band, local radio regulations may impose a number of limitations to the use of wireless communication equipment.

  • Page 145: Supported Frequency Sub-Bands

    Subject to the radio regulations that apply in the countries/regions, your Wireless LAN module may support a different set of 5 GHz/2.4 GHz channels. Consult your Authorized Wireless LAN or TOSHIBA Sales office for information about the radio regulations that apply in the countries/regions.
  • Page 146 Wireless LAN ■ In a Wireless LAN Access Point, the Wireless LAN module will use the factory-set default channel (printed in bold), unless the LAN Administrator selected a different channel when configuring the Wireless LAN Access Point device. 5GHz Band Channels Sets (Wireless IEEE 802.11 Revision a and n) Frequency Range 5150-5850 MHz Channel ID...
  • Page 147 Wireless LAN 5805* 5825* *1 Factory-set default channels *2 The channel which can be used depends on the installed wireless LAN module. And the approved channels on using are different at each country or region. The channel configuration is managed as follows: ■...

  • Page 148: Appendix D Bluetooth Wireless Technology Interoperability

    Logo certification with Bluetooth wireless technology as defined by The Bluetooth Special interest Group. ■ When you use Bluetooth Adaptor from TOSHIBA close to 2.4 GHz Wireless LAN devices, Bluetooth transmissions might slow down or cause errors. If you detect certain interference while you use Bluetooth Adaptor from TOSHIBA, always change the frequency, move your computer to the area outside of the interference range of 2.4 GHz...

  • Page 149: Bluetooth Wireless Technology And Your Health

    Because products with Bluetooth wireless technology operate within the guidelines found in radio frequency safety standards and recommendations, TOSHIBA believes Bluetooth wireless technology is safe for use by consumers. These standards and recommendations reflect the consensus of the scientific community and result from deliberations of panels and committees of scientists who continually review and interpret the extensive research literature.
  • Page 150 The radiated output power of the Bluetooth Adaptor from TOSHIBA is far below the FCC radio frequency exposure limits. Nevertheless, the Bluetooth Adaptor from TOSHIBA shall be used in such a manner that the potential for human contact during normal operation is minimized.

  • Page 151: Using Bluetooth Adaptor From Toshiba Equipment In Japan

    3. Contact TOSHIBA Direct PC if you have problems with interference caused by this product to Other Radio Stations. User’s Manual...

  • Page 152: Device Authorization

    Bluetooth wireless technology Interoperability 2. Indication The indication shown below appears on this equipment. (1) 2.4 : This equipment uses a frequency of 2.4 GHz. (2) FH : This equipment uses FH-SS modulation. (3) 1: The interference range of this equipment is less than 10 m. This equipment uses a frequency bandwidth from 2,400 MHz to 2,483.5 MHz.

  • Page 153: Ac Power Cord And Connectors

    Appendix E AC Power Cord and Connectors The power cord’s AC input plug must be compatible with the various international AC power outlets and the cord must meet the standards for the country/region in which it is used. All cords must meet the following specifications: Length: Minimum 1.7 meters...
  • Page 154 AC Power Cord and Connectors Denmark: DEMKO Norway: NEMKO Finland: FIMKO Sweden: SEMKO France: LCIE Switzerland: Germany: United Kingdom: In Europe, two conductors power cord must be VDE type, H05VVH2-F or H03VVH2-F and for three conductors power cord must be VDE type, H05VV-F.

  • Page 155: Toshiba Pc Health Monitor

    Once enabled, you may disable the TOSHIBA PC Health Monitor at any time by uninstalling the software via Uninstall a program in the Control Panel. Doing so will automatically delete all collected information from the HDD.

  • Page 156: Starting The Toshiba Pc Health Monitor

    Starting the TOSHIBA PC Health Monitor The TOSHIBA PC Health Monitor can be started using the following methods: ■ Click Start -> All Programs -> TOSHIBA -> Utilities -> PC Health Monitor. ■ Click the icon ( ) in the notification area, then click the "Enable PC Health Monitor..."...

  • Page 157: Legal Footnotes

    Appendix G Legal Footnotes This chapter states the Legal Footnotes information applicable to TOSHIBA computers. Non-applicable Icons Certain computer chassis are designed to accommodate all possible configurations for an entire product series. Therefore, please be aware that your selected model may not have all the features and specifications corresponding to all of the icons or switches shown on the computer chassis.

  • Page 158: Memory (Main System

    86°F) or >25°C (77°F) at high altitude (all temperature references are approximate and may vary depending on the specific computer model - please refer to your computer documentation or visit the Toshiba website at www.pcsupport.toshiba.com for details). CPU performance may also vary from specifications due to design configuration.

  • Page 159: Battery Life

    Published battery life numbers are achieved on select models and configurations tested by TOSHIBA at the time of publication. Recharge time varies depending on usage. Battery may not charge while computer is consuming full power.

  • Page 160: Wireless Lan

    Legal Footnotes Wireless LAN The transmission speed over the wireless LAN and the distance over which wireless LAN can reach may vary depending on surrounding electromagnetic environment, obstacles, access point design and configuration, and client design and software/hardware configurations. The actual transmission speed will be lower than the theoretical maximum speed.

  • Page 161: Glossary

    Glossary The terms in this glossary cover topics related to this manual. Alternate naming is included for reference. Abbreviations AC: Alternating current ACPI: Advanced Configuration and Power Interface AMT: Intel Active Management Technology ASCII: American Standard Code for Information Interchange BIOS: basic input/output system bps: bits per second CD: compact disc...
  • Page 162 Glossary IDE: integrated drive electronics IEEE: Institute of Electrical and Electronics Engineers I/O: input/output IRQ: interrupt request KB: kilobyte LAN: local area network LCD: liquid crystal display LED: light emitting diode MB: megabyte MMC: multi media card OCR: optical character recognition (reader) PC: personal computer PCI: peripheral component interconnect RAM: random access memory...

  • Page 163: Index

    External monitor 2-4, 3-25 replacing 6-8 problems 8-15 Bluetooth 3-7, 4-12 Bluetooth Stack for Windows by Toshiba 3-12 FN + 1 (TOSHIBA Zooming Utility problems 8-17 reduce) 5-5 Boot Priority 7-3 FN + 2 (TOSHIBA Zooming Utility Bridge media slot 2-3, 3-15...
  • Page 164 Satellite/Satellite Pro/PORTÉGÉ T210/T210D/T230/T230D Series FN + F7 (Brightness Up) 5-4 Zoom 5-4 FN + F8 (Wireless) 5-4 FN + F9 (Touch Pad) 5-4 Indicators 2-9 FN + space (Zoom) 5-4 Function keys 5-2 Keyboard 5-1 FN Sticky key 5-5 Graphics controller 3-6 Function keys F1...F12 5-2...
  • Page 165 Satellite/Satellite Pro/PORTÉGÉ T210/T210D/T230/T230D Series Processor 3-1 Password Starting the computer by 6-12 Recovery Media 1-15 power on 3-8 problems 8-18 problems 8-7 Recovery hard disk drive 1-14 Pointing Device Restarting the computer 1-11 Touch Pad 8-10 Power Hibernation Mode 1-10...
  • Page 166 Satellite/Satellite Pro/PORTÉGÉ T210/T210D/T230/T230D Series Web Camera 2-8, 3-6, 4-2 Wireless LAN 3-7, 4-11 problems 8-17 Wireless communication 4-11 indicator 2-10, 4-14 xD picture card 3-15 inserting 3-17 removing 3-18 User’s Manual Index-4...

This manual is also suitable for:

Portege t230d seriesPortege t210 seriesPortege t230 seriesSatellite pro t210 seriesSatellite pro t210d seriesSatellite pro t230 series ... Show all

Table of Contents