▶
Power LED
When ACPI Standby State s set to [S3], ths tem wll avalable. Ths tem configures
how the system uses power LED on the case to ndcate the sleep/suspend state. Aval-
able optons are:
[Sngle]
The power LED turns off durng the sleep/suspend mode.
[Dual]
The power LED changes ts color to ndcate the sleep/suspend
state.
[Blnkng]
The power LED blnks to ndcate the sleep/suspend state.
▶
Restore On AC Power Loss
Ths tem specfies whether your system wll reboot after a power falure or nterrupt
occurs. Settngs are:
[Off]
Always leaves the computer n the power off state.
[On]
Always leaves the computer n the power on state.
[Last State]
Restore the system to the status before power falure or nterrupt
occurred.
▶
Wake Up Event Setup
Press <Enter> and the followng sub-menu appears.
▶
Wake up Event By
Settng to [BIOS] actvates the followng fields, and use the followng fields to set the
wake up events. Settng to [OS], the wake up events wll be defined by OS.
▶
Resume From S3 By USB Devce
The tem allows the actvty of the USB devce to wake up the system from S3 (Sus-
pend to RAM) sleep state.
▶
Resume From S3 By PS/2 Keyboard / Mouse
These tems determne whether the system wll be awakened from what power sav-
ng modes when nput sgnal of the PS/2 keyboard/ mouse s detected.
▶
Hot Key
When the Rusume From S3 By PS/2 Keyboard s set to [Hot Key], ths tem wll aval-
able. Ths tem allows you to set the hot key to resume from keyboard.
▶
Resume By PCI Devce (PME#)
When set to [Enabled], the feature allows your system to be awakened from the
power savng modes through any event on PME (Power Management Event).
MS-7586
MS-7586
3-13