Preparing For Use; Filling The Water Tank; Automatic Rinsing Cycle - Philips HD8030 User Manual

EnglisH
8
4203_000_7242_2_DFU-Luxury_A5_v1.indd 8

Preparing for use

Filling the water tank

Fill the water tank with fresh water before each use.
Note: The 'water tank empty' light goes on when there is not enough water in
the water tank to brew one cup of coffee.
1 Remove the water tank from the coffeemaker.
2 Rinse the water tank under the tap.
3 Fill the water tank with cold tap water up to the MAX indication.
Never fill the water tank with warm, hot or sparkling water, as this may
cause damage to the water tank and the coffeemaker.
4 Slide the water tank back into the coffeemaker.

automatic rinsing cycle

To guarantee the perfect cup of coffee the coffeemaker uses water to
rinse the brewing system. This happens during the automatic rinsing cycle
when the coffeemaker has not been used for a longer period of time (20
hours) and before and after brewing each cup. A part of the water flows
through the internal system directly into the drip tray.
1 Insert the plug into the wall socket.
2 Place a cup on the drip tray cover.
3 Press the on/off button to switch on the coffeemaker.
1/9/13 1:37 PM