Focus Lock; Focus Range - Konica Minolta DImage X60 Instruction Manual

Hide thumbs Also See for DImage X60:

Table of Contents

FOCUS LOCK

The focus-lock function is used when you want to compose the image with the subject

off-center and outside the focus frame. Focus lock may also be used when a special

focusing situation prevents the camera from focusing on the subject. This function is

controlled with the shutter-release button.

The focus range depends on the zoom position. To focus closer than the distances below,

use the Super Macro function (p. 30).

Wide-angle position

0.1m ~ ∞ (4 in. ~ ∞)

ECORDING

BASIC OPERATION

Place the subject within the focus frame. Press and hold

the shutter-release button partway down to lock the focus.

The monitor focus signal and the focus frame indicate if

the focus is locked.

Without lifting your finger from the shutter-release button,

recompose the subject within the image area. Press the

shutter-release button all the way down to take the

picture.

Telephoto position

0.5m ~ ∞ (20 in. ~ ∞)

Table of Contents