CYBEX Eagle Glute 11170-999 H Owner's And Service Manual page 20

E. Pull belt tight and secure belt to clamp with the two
set screws. NOTE: Torque set screws 300-350in./lbs.
See Figure 9.
F. Place weight stack pin in each plate to verify proper installation.
G. Without selecting any resistance, lift top weight
up and down (simulating normal operation).
H. Have an assistant verify that the belt is moving smoothly and is
routed straight from the top pulley bracket to the
top weight belt clamp.
I. Reinstall the six increment weights that were removed
in step 6B. See Figure 10.
J. Turn the Increment Weight Adjusting Kob to select all
15 lbs.
8. Install back shrouds.
A. Carefully place shroud assembly back into position
on the two bottom screws. See Figure 11.
B. Install the top two screws securing the back shroud
assembly. See Figure 12.
C. Install the three Phillips head screws securing
the top (back) shroud. See Figure 13.
Assembly
Page 4-4
Cybex Eagle 11170 Glute Owner's Manual
Belt
Set screw
Figure 9
Grooves
Increment Weights
Figure 10
Figure 11
Figure 12
Figure 13
Belt clamp
insert
Belt
clamp
Screw
Screw
Phillips Head
Screw (3)