Table of Contents
Advertisement
®
To reset the pre-filter or filter counters before the indicators are lit:
In some environments, you may want to change the pre-filter or filter
more frequently than indicated by the filter indicators. This procedure
allows you to reset the pre-filter or filter counter before the indicators are
lit.
1. Change the filter and/or pre-filter as described in the Maintenance
section of the manual.
2. Now, you must choose which counter you want to reset. Press and
hold the filter reset key (approximately three seconds) until the pre-
filter indicator flashes. Press and release the reset key again to
alternate between the two indicators. The counter that will be reset
is designated by the flashing indicator.
For Models 36394 and 36395: Use the tip of a pen or pencil to press
the key.
3. Once you have the correct indicator flashing, press and hold the reset
key for three seconds to reset that counter to zero hours. The indicator
will stop flashing when it has been reset. If needed, repeat these
steps to reset the other counter.
AIR PURIFIER MAINTENANCE
CLEANING YOUR AIR PURIFIER
Proper maintenance of your Hunter Air Purifier will help ensure years of
trouble free service. Follow these steps to properly maintain your air
purifier:
1. Approximately every 90 days, the outside of the unit should be cleaned
with a soft, damp cloth.
2. If needed, the front grille can be removed from the unit and cleaned
with soapy water. Simply remove the pre-filter before exposing the
grille to water.
3. Use the following instructions to determine when and how to replace
the filter and pre-filters.
Notes:
· The air purifier should be unplugged during all cleaning processes.
· Be sure the unit is completely dry before plugging in and using.
· Never immerse the unit in water.
8
41481-01 10-5-2001
Advertisement
Table of Contents
