41. Do not apply pressure at the components underneath.
Gently lever up the flex connector.
43. Keep these adhesives clean if this part should be reused.
Alse remove the adhesive residues on the opponent part.
45. Do not apply pressure at the components while opening the
flex connector.
47. Gently unlock this clip of the D-COVER on both sides of the
ENGINE MODULE.
Page
15
(24)
CONFIDENTIAL
Copyright © 2007-2008 NOKIA. All rights reserved.
5610 Xpress Music RM-242/RM-279/RM-358/RM-359
42. Release the adhesive pads of the TOP FLEX ASSEMBLY,
beginning at this edge. Also release the other shown pads.
44. Continue with the lower assembly. Use the SS-93 for
opening the flex connector of the CAMERA FLEX MODULE.
46. Lift out the CAMERA FLEX MODULE now.
48. Lift out the ENGINE MODULE.
Service Manual Level 1&2
ISSUE 2