Nikai NDVD1073VR Instruction Manual page 33

QUICK START GUIDE FOR SORTING CHANNELS ON THE DVD COMBO
Once the 'Auto Set' function has been completed the On Screen Display will show a list of the
channels which it has found, displayed in the order it found them.
It is unlikely, that they will be in the correct oder ie. ARD as PR01, ZDF as PR02, P-03 as PR03, p-04
as PR04 and MTV as PR05.
Therefore, it will be necessary to Sort the channels displayed, into the correct order.
Please follow the following procedure.
1
Press the [VCR] button to select the VCR mode.
2
Press the [SETUP] button.
3
Select the 'PR PRESET' using [ ... ... /† † ] buttons and press the
[OK/ENTER] button.
4
Select the 'PR ALIGN' using [ ... ... /† † ] buttons and press the
[OK/ENTER] button.
5
Select the channel that needs to be moved and press the [OK/ENTER]
button.
6
Press the [OK/ENTER] button in order to select the 'PR' number which
you want to place the current selected channel using [ ... ... /† † ] buttons.
ie. PR01 ARD. And press the [OK/ENTER] button to confirm.
Repeat above 5-6 steps to align the other channels.
STOP SP PR01 P-01
SETUP
TIMER PROGRAM
PR PRESET
VCR SETUP
TAPE CONTROL
PR+/-:SELECT
OK:CONFIRM SETUP:END
PR PRESET
AUTO SET
MANUAL SET
PR ERASE
PR ALIGN
PR+/-:SELECT
OK:CONFIRM SETUP:END
PR ALIGN
PR01 P-01 PR08 P-08
PR02 ZDF PR09 P-09
PR03 P-03 PR10 P-10
PR04 P-04 PR11 P-11
PR05 MTV PR12 ----
PR06 ARD PR13 ----
PR07 P-07 PR14 ----
PR+/-:ALIGN
:PR VIEW
OK:CONFIRM SETUP:END
PR ALIGN
PR01 ARD PR08 P-08
PR02 P-01 PR09 P-09
PR03 ZDF PR10 P-10
PR04 P-03 PR11 P-11
PR05 P-04 PR12 ----
PR06 MTV PR13 ----
PR07 P-07 PR14 ----
PR+/-:ALIGN
:PR VIEW
OK:CONFIRM SETUP:END